Rickenbacher B-6 electronics

chris ivey · From: california (deceased)

can anyone tell me what the original tone/volume pots should be? mine is a '37 with knobs (what should they look like) on opposite sides of pickup. are there authentic sounding replacements available?
thanx........

Rick Aiello · From: Berryville, VA USA

I took a "poll" of my Prewar Ricks ...

The Capacitors were those "tube" like ones:

The brown TIGER ones:
1 was .1 MFD 400 VDC
5 were .05 MFD 400 VDC
1 was .05 MFD 200 VDC

The orange SPRAGUE ones...
2 were .03 MFD (no VDC listed)

The potentiometers that that were labled said CENTRALAB (Milwaukee) .... most had big black cases ... one had a visible marking on the side that said 500K (volume).

Only one of the smaller metal ones (later prewars) said 500K (tone)... the others were not labled.

I hope this helps ...

------------------

www.horseshoemagnets.com

[This message was edited by Rick Aiello on 06 May 2003 at 05:44 AM.]

chris ivey · From: california (deceased)

thnx rick....i'll tell my solder monkey!

J D Sauser · From: Wellington, Florida

Rick, was these volume control only or do you have information on the tone cap too... or is it just the one?

Thanks! ... J-D.

Rick Aiello · From: Berryville, VA USA

The info on the capacitors (Tiger/Sprague) is given above .... both volume pot and tone pots were 500K ...

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: