| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic A/B BOX Confusion.
Reply to topic
Author Topic:  A/B BOX Confusion.
Martin Weenick


From:
Lecanto, FL, USA
Post  Posted 28 Apr 2003 12:29 am    
Reply with quote


Can anyone recommend an A/B Box that I can buy so I can make tuning corrections without unplugging my steel and plugging in the tuner? It would have to have a selector switch so I could bypass the steel completely. Also, do these boxes affect the accuracy of the signal to the tuner? Any help here would really be appreciated. Thanks, Martin.

------------------

Martin W. Emmons LG III 3/5 Peavy 1000
View user's profile Send private message Send e-mail
Larry Bell


From:
Englewood, Florida
Post  Posted 28 Apr 2003 5:10 am    
Reply with quote

This one is pretty good. Several companies make them. Go to any of the online music distributors and do a search for 'Switch'.

------------------
Larry Bell - email: larry@larrybell.org - gigs - Home Page
2003 Fessenden S/D-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro, Standel and Peavey Amps
View user's profile Send private message Send e-mail Visit poster's website
Ron Randall

 

From:
Dallas, Texas, USA
Post  Posted 28 Apr 2003 6:25 am    
Reply with quote

What Larry said.

Do they affect tuner accuracy? No.

I don't know your setup, but most volume pedals have two outputs. Can use one for the amp, one for the tuner. When I am thru tuning, I turn the tuner off. This stops the noise.

Hope this helps.
View user's profile Send private message Send e-mail
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 28 Apr 2003 2:35 pm    
Reply with quote

If you have a volume pedal with two outputs, you can rewire one of the outputs so that it is always "hot", even with the pedal backed off. That way you can tune and no sound will come out of the amp.

I do think you may have some impedance issues if you do this, though. These "issues" may equate to poor tone.

------------------
Lee, from South Texas
Down On The Rio Grande

View user's profile Send private message Send e-mail
Chip Fossa

 

From:
Monson, MA, USA (deceased)
Post  Posted 28 Apr 2003 5:13 pm    
Reply with quote

Martin,
Take one note from the tuner, maybe E, and tune the rest of the steel to it, by ear.

Works great for me.

Better yet....tune to the piano player, or any other band member, who claims to be in tune.

After all, in a band situation at least, everyone has to be in tune with everyone else.

If you are, sort-of-by yourself, confidently tuning with a tuner, believe it or not, when the truth is revealed, you may not be right-on with the rest of the band. Best to check.

I only use a tuner to get a starter note. Then I tune by ear, and what I hear.

FWIW...Chipper
View user's profile Send private message Send e-mail
Martin Weenick


From:
Lecanto, FL, USA
Post  Posted 29 Apr 2003 1:35 am    
Reply with quote

Thanks for the help guys. Ron R. I am using a Hilton with 2 outlets. Larry B., I ordered the Boss AB-2 from Musicians Friend. Looks like a decent unit. Of course they weren't in stock and wont be delivered till some time late next month. Hopefully about the same time I get delivery on the new V-SAM. I have noticed that Musicians Friend advertises a lot of things they dont stock. Anyway, problem is solved. Thanks much.

------------------

Martin W. Emmons LG III 3/5 Peavy 1000
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron