| Author |
Topic: For Mike Brown |
Bill Plemmons
From:
Simpsonville, SC
|
Posted 13 Apr 2003 4:11 pm |
|
| Mike, What improvements does the ver. 1.4 software for the Profex ll upgrade offer as opposed to ver. 1.3? |
|
|
 |
Jimmy Broussard
From:
Denton, Texas, USA
|
Posted 14 Apr 2003 10:31 am
|
|
| I've also got a question so we don't have to start another thread,What does the Lemay mod or burr brown chips do to a profex 2 and where can I locate info on how to do it,chip serial numbers etc.Thanks. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 14 Apr 2003 1:09 pm
|
|
Bill, Profex II version 1.4 version cured fixed a glitch in the programming when using a continuous controller. So, if
Version 1.3 also fixed a programming glitch when sending controller #91 through a midi chain. The unit would go into bypass mode.
Version 1.2 added three new(at that time)pedal steel presets.
Jimmy, what the Burr Brown OPA2604 chips do that we offer in our Profex II mod kit, is bring the noise spec/levels up to today's standards. At the time that the Profex II was designed, 5332's and 4558's were pretty much industry standard chips. However, the highly respected 2604 is among the best for reducing the noise level and increasing speed.
If you wish to order these chips, call our U.S. toll free number at 1-877-732-8391. The Profex II mod kit can also be purchased at this number. Our engineering group designed the Profex series and our manufacturing facilities built it. Third party companies cannot reprogram the software of the Profex II.
|
|
|
|
Jimmy Broussard
From:
Denton, Texas, USA
|
Posted 20 Apr 2003 9:10 am
|
|
| Thanks for the info Mike.I just purchased a Profex 2 and am looking forward to experimenting with it. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 21 Apr 2003 10:09 am
|
|
| You are welcome. |
|
|
|
