Mike Brown
From: Meridian, Mississippi USA
|
Posted 26 Mar 2003 8:56 am
|
|
Tom, I discussed the symptoms with one of our technicians who repairs the programmable products here in the service department and he stated that it could be a number of considerations. No one thing stands out as a particular problem, but the first place that he would check is the motorized potentiometers. Other than this, I suggest that you reinitialize the Tubefex by pressing and holding the DOWN and RIGHT arrow buttons and turn the power on while holding them for approximately 2-3 seconds.
This procedure will revert all custom presets to factory settings, so if you wish to save your custom presets, use a RAM cartridge and reload them after reinitializing the unit. If you have other questions, please let me know and I will be glad to assist. I can be reached toll free at 1-877-732-8391 from 8am-5pm CST.
Mike Brown
Peavey Electronics Corporation |
|