| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic two string harmonics
Reply to topic
Author Topic:  two string harmonics
Chuck Trombley

 

From:
Broken Arrow, Ok. 74012
Post  Posted 12 Oct 2001 5:57 pm    
Reply with quote

Jerry Byrd, John Ely and others have a unique way of playing harmonics on one string and normal on another string. Is there a Formulite who knows how to do this and willing to share? Many many years ago my Mastertone lessons said to use harmonics on the lower string and immediately drop the wrist and catch the upper string. After all these years it still avoids me. Can you help?
View user's profile Send private message Send e-mail Visit poster's website
Paul Graupp

 

From:
Macon Ga USA
Post  Posted 13 Oct 2001 6:58 am    
Reply with quote

Chuck; I used to do these chimes a long time ago and still do occasionally. But I have always used (on a C6th Tuning.) the first string and the fourth string or the second string and the fifth string; the harmonic on the lower string and the high string normal.

I just rock my hand back a bit so as not to touch the high string as I strike both at the same time. I first got the idea from a sound Jerry Byrd used on a Hank Williams song: Wedding Bells. It really does accentuate the chime effect.

The string selections, 1 & 4, 2 & 5 turn out to be inversions and using the chime on the lower one, causes the inversion to flip back the other way. 1-E & 4-G-low, become E-G- high.
2-C & 5-E-low, become C-E-high. But the sound is a completely different thing. Be !!

Regards, Paul

[This message was edited by Paul Graupp on 13 October 2001 at 08:03 AM.]

View user's profile Send private message Send e-mail
Tony Palmer


From:
St Augustine,FL
Post  Posted 13 Oct 2001 9:38 am    
Reply with quote

I can usually hit 2 strings (3 and 4 on E9) and use the edge of my palm, where you would palm block, to get harmonics on both strings at once.
For emphasis, I usually slide up to another position and engage B and C pedals.
View user's profile Send private message Send e-mail
chas smith R.I.P.


From:
Encino, CA, USA
Post  Posted 13 Oct 2001 9:49 am    
Reply with quote

You might try using the knuckle on your 'pinkie' fnger, it works for me.
View user's profile Send private message
Kevin Post

 

From:
Nashville, TN, USA
Post  Posted 16 Oct 2001 7:17 am    
Reply with quote

If you use a volume pedal, you can pick low strings and chime high strings, and then swell in with the pedal. You have to hit the note a beat ahead of where you want. Then swell in on the beat. It's a very full sound because you can get three octaves in one chord. I always use my fingernail of my ring finger to chime. You can catch two or even three strings at once.
View user's profile Send private message Send e-mail Visit poster's website
Paul Graupp

 

From:
Macon Ga USA
Post  Posted 17 Oct 2001 4:14 am    
Reply with quote

Kevin; I'm going to have to try that finger nail approach. That's a new one on me !! I did at one time experiment with the edge of my finger nail to locate the exact length of a string on regular guitar to make sure the 12th fret chime was exactly over the 12th fret. BTW; are you still working with Terri Clark ?? We met at Whisky River, Macon, GA
a year or two ago. Good to see you here on the Forum.

Regards, Paul
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron