Mike - Nashville 400 minor problem?

Dag Wolf · From: Bergen, Norway

A fellow called me yesterday and he`s having a little problem with his Nash.400.

After turning the amp on and leaving it on for about 25 minutes the yellow copm. light comes on and stays on. It?S a `88 model and has been this way since it was new.

He claimes that he has no problem with the sound.
Should he do something with it?

Thanks,
Dag

Mike Brown · From: Meridian, Mississippi USA

This may be caused by a defective 87478 compression IC or maybe a problem with that IC socket.

Hope that this helps.

Mike Brown
Peavey Electronics Corporation

Dag Wolf · From: Bergen, Norway

Thanks Mike.
I`ll forward your answer.

Dag

Gary Walker · From: Morro Bay, CA

Dag, I have the same problem with my Session 500 only the light is on at startup and seems to reduce the volume somewhat.

Mike Brown · From: Meridian, Mississippi USA

Gary, I would check for a shred of metal that maybe caught in the Black Widow speaker gap. It may just need blowing out with a high pressure air nozzle.

Gary Walker · From: Morro Bay, CA

Thanks Mike, I have also been advised that it may be some corrosion in the Molex connectors and spray some contact cleaner on them. Will have to take the bull by the horn. I love this amp, thanks again,Gary.

[This message was edited by Gary Walker on 19 September 2002 at 10:07 PM.]

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: