| Author |
Topic: need help with effect |
Damir Besic
From:
Nashville,TN.
|
|
|
 |
Ernie Renn
From:
Brainerd, Minnesota USA
|
Posted 17 May 2001 5:06 pm |
|
Damir;
You might want to check out: Larry Bell's 2112 site. It deals with the 2112. It might be similar. It would be worth a look to find out.
Good luck! 
------------------
My best,
Ernie
The Official Buddy Emmons Website
www.buddyemmons.com
|
|
|
|
Tom Diemer
From:
Defiance, Ohio USA
|
Posted 17 May 2001 7:34 pm
|
|
Damir,
I'm not real familier with that 2120, but I have an RP-3 I use with guitar once in a while, and I think they are similar.
My point:
I think you have to reassign the pedal, to be volume. It can be assigned different duties, such as Wah, pitch bend, harmony voicings, ect, and with the preset you are using, it varies the level of distortion. You can reassign the pedal to the volume channel, L1 or L2 then save that to a 'user' preset.
In my unit, it's called 'Master Level - L1 or L2'. You may have 'dE (distortion)' or something assigned to the pedal with that particular preset.
Here is what mine says:
Parameter: displayed values
Expression pedal HH-SP-dE-bd-Fb-L1-L2
dE = distortion, probably what you will find set to the expression pedal. You need L1 or L2 put there, for volume.
Your unit may not match this, but should be similar in how it programs.
Hope this helps, best of luck.
Tom |
|
|
|
Damir Besic
From:
Nashville,TN.
|
Posted 18 May 2001 6:03 am
|
|
Thaks guy`s,I`m fighting that problem for a long time and finaly yesterday I came up with an idea about posting that here and ask for help.I have no clue why did I wait so long to do so.Thank you very much.
Sincerely,Damir
------------------
http://hometown.aol.com/damirzanne/damirzanne1.html |
|
|
|
.So I have to adjust output on the level that I want to play with manualy on the effect.2120 is very complicated effect and I`m far from mastering it,so if anyone out there can help I would be more than thankfull 
