Boss TU-2 tuner (pedal version)

Cliff Swanson · From: Raleigh, NC

Anyone know whether offsets from 440 can be calibrated for individual pitches in this tuner? I tune almost all my opens and pedals/knees to 440, but I'm still tuning my G#s and C#s to 438 and 436, respectively. I'm just wondering whether it's possible to calibrate the TU-2 to these alternate frequencies.

Just to make this clear (I hope

)....I'm talking about the newer Boss tuner that is a stomp box, not the hand held TU-12 with the meter. The product information specifies that the tuner can be tuned down a half step or a whole step, but I'm asking whether individual pitches can be selectively calibrated to a reference other than 440. This feature enables a user to program a tuning chart into the tuner so that when the tuner lights indicate that a particular string is in tune, it may actually be tuned to 438 (for example) or whatever other reference pitch is selected for that string, rather than 440. I hope this helps clarify my question.

Any input appreciated.

Cat

[This message was edited by Cliff Swanson on 18 December 2000 at 05:39 PM.]

[This message was edited by Cliff Swanson on 18 December 2000 at 06:06 PM.]

John Sims · From: Ft. Lauderdale, FL

Yep,

The TU-12 can be tuned up or down.

------------------
Regards,

John

Steelin' is a way of life!

My PSG website-Carter SD-12-U, 8p/5k, Nashville 1000

Jim Smith · From: Midlothian, TX, USA

I think Cliff is asking about the TU-2, apparently a pedal version of the TU-12. I don't use either, but that's my guess.

John Sims · From: Ft. Lauderdale, FL

OK, Sorry! I know the TU-12 can be pitched up or down from 435 to 445...I would only assume (you know what happens when you do that!) that the TU-2 would do the same.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: