Gerber Files?

Keith Hilton · From: 248 Laurel Road Ozark, Missouri 65721

Does anyone know who sells Gerber Files for Windows? I tried to look up Gerber on the internet and found nothing. Gerber Files are used in making electronic circuits. No, I'm not looking for baby food. Thanks!

[This message was edited by Keith Hilton on 29 November 2000 at 10:24 PM.]

Terry Downs · From: Wylie, TX US

Keith,
I'm not sure about your question. Circuit board design (CAD) programs creat gerber files.

Are you looking for a specific circuit board layout in gerber format? - Good luck, companies keep their PWB layouts proprietary

Are you looking for a CAD program to generate gerber from a PWB layout? - Good ones are expensive. I have downloaded some free PC board layout programs, but they only allow you to print out the artwork and use it as a photo-resist transfer method. It has nothing that provides a gerber output. IF YOU FIND ONE LET ME KNOW!!

Regards,
Terry

------------------
Terry Downs
http://nightshift.net
terry@nightshift.net

ToneJunkie · From: Columbia, MD, USA

Terry nailed it. AutoDesk sells a 'lite' version of their AutoCAD at about $500. Ya need a honkin' PC or lots of time to run it.

Cheers

------------------
Robert Hicks - Fessenden S12U

Home Page: http://www.members.home.net/tonejunkie
Email: rhhicks@home.com

André Sommer · Posted 30 Nov 2000 12:16 am

Keith,
I have no clue about Gerber Files but is this getting you anywhere? : http://www.apcircuits.net/html/gerbercosoftware.html or: http://www.ipc.org/html/fsresources.htm

I don't know if you did a search using "Ask Jeeves" but it turned up quite a few links: http://www.ask.com/

Here's another link to a page with many search engines combined: http://www.searchlores.org/main.htm

HTH,

André.

Keith Hilton · From: 248 Laurel Road Ozark, Missouri 65721

Thanks for your answers! Actually I am looking for a Windows based program relating to electronic circuits,to feed to a CNC computerized engraving machine, to cut, "through the hole" boards.

Keith Hilton · From: 248 Laurel Road Ozark, Missouri 65721

Terry, Mark A. answered my question. You can order "Winboard" from Mouser Electronics. This has Gerber artwork and Excelon drill table files. Every PCB maker wants Gerber files. The next question is how much it costs. I am going to my Mouser catalog right now and find out. Hope this helps. Found it! Actually there are two programs: Windraft and Winboard. Each sells for $29.95. Sounds like a winner, especially if you want to design circuts on your computer.

[This message was edited by Keith Hilton on 01 December 2000 at 05:49 PM.]

[This message was edited by Keith Hilton on 01 December 2000 at 05:50 PM.]

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: