| Author |
Topic: 12-2002 Carter D10 W/BCT Like New! |
Sonny Miller
From:
Lino Lakes, Minnesota, USA
|
Posted 6 Mar 2005 3:20 pm |
|
I have a Carter D10 with 8 +5 knees , and two of the knees work on the C6 too.
Standard Emmons set up.
Bought this steel from Al Marcus, and i could not get used to the Double neck even though it sounds fabulous. It has a George L's, E66 on the E9, and a 10-1 on the C6 neck.Wonderful balance of tone.
It is Formica , and is a beautiful Blue Birds eye. The price is 2550.00. And the price is firm. However, shipping will be free for a limited time only!
This steel is as new as it gets! And as pretty as i have seen them.
I am selling it because i am going to a single SD 10 Williams, as the C6 is too much for me at this time in my life.I also appreciate the light weight of this Carter, and you will too.
Tel 651-407-0161 Or Email me with questions etc.
If somebody can repost the Pictures, I will send them some pictures and they can post them for me! Thanks [This message was edited by Sonny Miller on 06 March 2005 at 03:42 PM.] [This message was edited by Sonny Miller on 06 March 2005 at 03:45 PM.] [This message was edited by Sonny Miller on 06 March 2005 at 08:30 PM.] [This message was edited by Sonny Miller on 07 March 2005 at 02:06 PM.] |
|
|
 |
Sonny Miller
From:
Lino Lakes, Minnesota, USA
|
Posted 7 Mar 2005 2:08 pm
|
|
| BUMP BUMP BUMP |
|
|
|
Al Marcus
From:
Cedar Springs,MI USA (deceased)
|
Posted 8 Mar 2005 2:15 pm
|
|
This was one of the nice D10 Carters. It has a good sound and plays very good.
Sonny just can't seem to decide if he wants SD10 or a D10. If I was still playing out, I would keep it. ....al
------------------
My Website..... www.cmedic.net/~almarcus/
[This message was edited by Al Marcus on 08 March 2005 at 02:16 PM.] |
|
|
|
Sonny Miller
From:
Lino Lakes, Minnesota, USA
|
Posted 8 Mar 2005 6:29 pm
|
|
You are so right Al, but i will find what i am looking for in my next guitar.
I have tried just about every steel out there, and i know what i am looking for now.
At my age , i need a rocking chair, but will be satisfied with a SD armrest and wider knees , like you find on a Willie, for instance. |
|
|
|
B.Jenkins
From:
Parkersburg, WV...U.S.A
|
Posted 10 Mar 2005 3:32 am
|
|
 |
|
|
|
Jon Jaffe
From:
Austin, Texas
|
Posted 11 Mar 2005 3:35 pm
|
|
Sonny's Carter
 |
|
|
|
Sonny Miller
From:
Lino Lakes, Minnesota, USA
|
Posted 11 Mar 2005 7:31 pm
|
|
Good job on the pictures Jon,considering the poor grade of pictures i sent you.
Here is a good way to get the best that Carter offers in a Carter D10 with BCT on both necks.
I believe that would cost you 400 per neck, if it did not come free on their new guitars. If you want to save 500.00 at a minimum, jump on this guitar with both feet.
It comes with a new case, owners manual, and a book of steel guitar harmonized scales using most of the levers and knees to get all the various scales. This will keep you busy ,for sure, and give you a nice start, no matter what your skill level is. |
|
|
|
Ann Fabian
From:
Mesquite, Texas, USA
|
Posted 12 Mar 2005 8:49 am
|
|
Sonny:
As you mentioned above, BCT has been included on all Carters since about mid-1998.
For Carters manufactured before BCT was invented and patented, BCT UpGrades actually cost $250 for ONE neck and $400 for TWO necks.
 Ann Fabian
Carter Steel Guitars
[This message was edited by Ann Fabian on 12 March 2005 at 09:20 AM.] |
|
|
|
Sonny Miller
From:
Lino Lakes, Minnesota, USA
|
Posted 12 Mar 2005 2:03 pm
|
|
| Thank you Ann, I stand to be corrected as I did not know for sure. Anyway , the BCT is a wonderful asset to a Carter steel guitar.AS I recall now, i was going to put it on a 94, that did not have it and the price was 400. Thanks for updating everyone. |
|
|
|
Hook Moore
From:
South Charleston,West Virginia
|
Posted 12 Mar 2005 2:16 pm
|
|
Sure is a pretty thing Sonny. 
Hook
------------------
HookMoore.com
Allen Moore
|
|
|
|
Sonny Miller
From:
Lino Lakes, Minnesota, USA
|
Posted 13 Mar 2005 6:32 am
|
|
A buyer really has two simple decisions,buy a new Carter D10, for about 3000.00 delivered,or one practically new for 2500,00. It is not hard for me to see a heck of a deal.
I'll wait for someone who wants to save about 500.00 on a almost new Carter D10 beauty.
Serious bidders only. Remember the price is 2500.00 delivered in the USA for a limited time only. |
|
|
|
Jerry Hendrix
From:
Manistee, Michigan, USA * R.I.P.
|
Posted 13 Mar 2005 3:16 pm
|
|
| Sonny, you got mail Jerry Hendrix |
|
|
|
Sonny Miller
From:
Lino Lakes, Minnesota, USA
|
Posted 13 Mar 2005 3:58 pm
|
|
And you Jerry Hendrix, have yourself a great pedal steel guitar!
The fact that Al Marcus, one of the greatest steel guitar players, and educators, in the world, owned this guitar, and is appreciated by you and I, make this a very enjoyable sale to us both!
Transaction in progress, and will notify when to close this thread, after transaction is completed.
Thank you everybody. |
|
|
|
Al Marcus
From:
Cedar Springs,MI USA (deceased)
|
Posted 14 Mar 2005 12:34 pm
|
|
Whoooa there Sonny!!! Not me. NO WAY.LOL
But thanks for your Exuberance. I am sure you meant well.........al
------------------
My Website..... www.cmedic.net/~almarcus/
|
|
|
|
Sonny Miller
From:
Lino Lakes, Minnesota, USA
|
Posted 28 Apr 2005 10:14 am
|
|
| Bob, Donation is on the way.Thanks |
|
|
|
