| Author |
Topic: How to Eliminate Forum Heading When Printing |
steve takacs
From:
beijing, china via pittsburgh (deceased)
|
Posted 12 Jan 2003 10:41 pm |
|
| Would someone please explain how I can eliminate the information prior to the first post(Steel Guitar Forum, directions for posting, etc.) when printing the tab? Thanks, Steve |
|
|
 |
Bill Fulbright
From:
Atlanta, GA
|
Posted 13 Jan 2003 1:22 am
|
|
Steve,
Just click and drag the mouse over the area you want to print, then right click the mouse to get the copy feature, click on copy, then...
Click on Start (in the tray below the window), Accessories, then Notepad. then...
Right click the mouse, click "paste". Voila.
Then click File, then Print.
This way you have full control of what ever you print.
Cheers!
------------------
Bill Fulbright
Mullen D-10 8x7; Gibson ES-165; Peavey Vegas 400;
ICQ# 2251620 My Music Site
|
|
|
|
Jim Smith
From:
Midlothian, TX, USA
|
Posted 13 Jan 2003 6:00 am
|
|
| If the tab prints okay for you from the page and you want to just print the tab, select the tab on the screen, right click and select Print, then choose Selection from the Print window that pops up. [This message was edited by Jim Smith on 13 January 2003 at 06:18 AM.] |
|
|
|
Graham
From:
Marmora, Ontario, Canada
|
Posted 13 Jan 2003 7:49 am
|
|
Steve:
Easiest way is to click on the "edit" tab in the post showing the tab. You can't edit somebody else's post but you can highlight and copy the tab, then paste it into Notepad. I have found this the easiest way and no problems with the tab lining up properly.
------------------
Rebel™
ICQ 614585
http://users.interlinks.net/rebel/steel/steel.html
|
|
|
|
Jim Eller
From:
Kodak, TN (Michigan transplant)
|
Posted 13 Jan 2003 11:40 am
|
|
Another option is to click and drag the section you want to print and then click on "Print" from the drop down "File" menu.
In the "Print Range" area of the Print box you have three choices (All, Pages and Selection), click on "Selection", then "OK" and there it is.
No cuttin' no pastin'. |
|
|
|
steve takacs
From:
beijing, china via pittsburgh (deceased)
|
Posted 18 Jan 2003 4:03 pm
|
|
| MAGIC!!!Thanks boys, you've done it again. Steve |
|
|
|
