Carl McLaughlin
From:
St.Stephen,New Brunswick,Can
|
Posted 20 Nov 2024 12:55 pm |
|
I am having trouble with Glissano? at the tone bar. I think i am parcially holding the tone bar off the strings with my finger. I have tried different tone bars. Anyone help
_________________
I have a Tele plus telecaster, Larrivee acoustic. Also have a Fender resonator guitar with new Quarterman cone and spider, and an Allan tailpiece .Playing through a Fender Super Champ XD, using a little delay on the amp and a Harmonix Holy Grail Echo pedal, set on Hall turned to about 1pm.Just Bought a Yamaha FGX5 Recently and love it. Recently got a Sho-NUFF 6 string pedal steel in open G.Still learning.Just bought back my old SX lap steel that i modified, in open G |
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 22 Nov 2024 10:51 pm
|
|
Be sure to keep the bar under you index finger, And only put pressure on your index finger, This may help with the problem.
Other things can cause this problem also.
What frets are you having the problem?
If the problem is at 1-2-3 fret may be a nut roller problem.
If it happens at just certain frets it can be caused by groves or rough places on changer fingers.
Sometimes you get strings that work harden where they leave the changer finger. The 4th string being raised and lowered, Some strings will work harden and lift up off the changer finger. I joking call it the Gremlin trying to sing harmony with the string.
Good Luck finding the problem and a cure. Happy Steelin. |
|
