| Author |
Topic: Derby and MCI Changer Hole Measurements |
Wayne Brown
From:
Bassano, Alberta, Canada
|
Posted 1 Nov 2024 1:23 am |
|
Hi folks I am in need of a couple of measurements again.
What I am looking for is the hole size both ways that the changer goes through the guitar body. I need a Derby's measurements and an MCI measurements.If you have one of these guitars I thank you for taking the time to help me out in my next builds.
Thanks
Wayne
_________________
Owner Out West Music,Seats,Parts and accessories
www.outwestcountry.ca |
|
|
 |
Wayne Brown
From:
Bassano, Alberta, Canada
|
Posted 4 Nov 2024 2:16 am steel guitar
|
|
ttt
_________________
Owner Out West Music,Seats,Parts and accessories
www.outwestcountry.ca |
|
|
|
Tommy Mc
From:
Middlesex VT
|
Posted 5 Nov 2024 8:00 am
|
|
Here's the best I can do with a Derby SD-10. There is a small (7/8" x 5/16") leg on the underside which is partially cut out...not going all the way through. It's maybe 3/16" or so deep but I cant get a rule in to measure exactly. I've measured the basic hole out from the endplate. Hope this helps.
_________________
1980 MSA Vintage XL S-10, 1975 Session 400
1972 Dobro model 66s
Derby SD-10
Tom McDonough |
|
|
|
Wayne Brown
From:
Bassano, Alberta, Canada
|
Posted 17 Nov 2024 3:00 am changer hole
|
|
Tom thank that really does help a lot. Anybody have the MCI hole size
thanks
wayne
_________________
Owner Out West Music,Seats,Parts and accessories
www.outwestcountry.ca |
|
|
|
