| Author |
Topic: How many are using the ToneX? |
Larry Behm
From:
Mt Angel, Or 97362
|
Posted 4 Sep 2024 7:55 pm |
|
Popular with guitar players, how about Steelers?
_________________
'70 D10 Black fatback Emmons PP, Hilton VP, BJS bars, Boss GE-7 for Dobro effect, Zoom MS50G, Stereo Steel amp, Telonics 15” speaker.
Phone: 971-219-8533 |
|
|
 |
Greg Cutshaw
From:
Corry, PA, USA
|
|
|
|
Doug Taylor
From:
Shelbyville, Kentucky, USA
|
Posted 5 Sep 2024 4:58 am
|
|
| I use a Tonex one plugged into a usb mixer for headphone practice every day! It’s the first setup I have had that I have been equally happy for steel or bass! |
|
|
|
Mike Neer
From:
NJ
|
Posted 6 Sep 2024 4:47 am
|
|
I got a ToneX yesterday. I am looking forward to diving in. I've always been a fan of amp sims, and I am embarrassed to say I still use a Digitech RP1000, though my amp plugin game is a bit more solid. 
And Greg, thanks for your ToneX page. Very helpful.
_________________
Links to streaming music, websites, YouTube: Links |
|
|
|
Ron Hogan
From:
Nashville, TN, usa
|
Posted 7 Sep 2024 8:49 am
|
|
I’ve just started with one week ago. A bit challenging on the learning curve. Manual is not great, so you have to search YouTube.
Currently I’m trying to figure out how to take a cabinet IR and load it into the ToneX software.
https://youtu.be/N7gyMfZYo1o?si=jbF9XXisAq807fY3 |
|
|
|
Avery Bradshaw
From:
Danville, Kentucky, USA
|
Posted 10 Sep 2024 12:37 pm
|
|
I just got one. I’m having a lot of trouble getting a nice clean tone from mine. Perhaps I just haven’t figured out the settings yet. But it does seem to work good. Hopefully I can get some better amps and IRs loaded into it soon.
_________________
MSA Legend D10, Twin Reverb/Little Walter PF89, Hilton Volume Pedal, Walker seat. |
|
|
|
Doug Taylor
From:
Shelbyville, Kentucky, USA
|
Posted 10 Sep 2024 1:41 pm
|
|
| Avery the input setting is critical to getting a clean tone. If you search YouTube you can find some info on it! If it is too high it won’t sound good. On ToneNET there is a milkman capture and a peavey setting, both sound good with steel. |
|
|
|
Greg Cutshaw
From:
Corry, PA, USA
|
Posted 10 Sep 2024 4:27 pm
|
|
from my review above here is how I got a clean sound:
"Input adjustments, especially the global Input Trim easily allow one to compensate for any high or low output pickup."
Some units are shipped with a high level of gain as the default Input Trim which causes an audible amount of distortion. |
|
|
|
Avery Bradshaw
From:
Danville, Kentucky, USA
|
Posted 11 Sep 2024 4:18 am
|
|
Thanks for the tips guys, I am going to dig a little deeper into mine today and see if my input trim is too high. I have humbuckers on both necks so I would say that is probably my issue. Thanks!
_________________
MSA Legend D10, Twin Reverb/Little Walter PF89, Hilton Volume Pedal, Walker seat. |
|
|
|
Ron Hogan
From:
Nashville, TN, usa
|
Posted 12 Sep 2024 6:57 am
|
|
Another thing to remember is, if your playing out live, not to the front of the house, don’t use a cabinet IR. Just use your speaker cabinet.
IR’s should only be used when you’re not using your own physical cabinet. IR’s are only for going direct to the PA, direct in the studio or practicing at home with the headphone Jack. |
|
|
|
George Seymour
From:
Notown, Vermont, USA
|
Posted 16 Sep 2024 7:03 am
|
|
Tone X can't sample amp characteristic...Quad Cortex, capture of my Standel amps..64 Audio molded IEM's...amp less stage. This is a game changer.
_________________
Old Emmons D-10's & Wrap Resound 65, Standel amps!
Old Gibson Mastertones |
|
|
|
Andrew Schmidt
From:
Austin Texas, USA
|
Posted 23 Sep 2024 11:11 am
|
|
| Greg Cutshaw wrote: |
from my review above here is how I got a clean sound:
"Input adjustments, especially the global Input Trim easily allow one to compensate for any high or low output pickup."
Some units are shipped with a high level of gain as the default Input Trim which causes an audible amount of distortion. |
@Greg, where did you end up running your "Trim In" at on global settings? Unfortunately I ended up having to boost mine to +11 @ trim in and +3 at the Output (Output makes sense as I believe my Fender FRFR amp is expecting "Line" level +4, but Trim In seems unusually high) Unfortunately my Hilton volume pedal doesn't have a gain boost. Kind of annoying that I'm hitting it so hard but I guess that's what trim controls are for anyways. I haven't gotten out the test tones and Oscilliscope ....yet 
I haven't heard distortion yet but I haven't taken it to the stage. This is one of those situations where because we constantly ride a volume pot as pedal steel players, we're outliers. Guitar players probably dont have this problem. 
All of that said, the TONEX sounds awesome! Clean and Clear so far. I am not retiring my Evans just yet as it has a great sound but I'm excited to be dipping my toes into modeling. |
|
|
|
Ron Hogan
From:
Nashville, TN, usa
|
Posted 30 Sep 2024 10:59 am
|
|
Here I am testing some more on the ToneX pedal (Modeler). Real excited about this thing. Of course, when you play a live gig everything sounds different then in you practice room. But my live gigs went well with this.
https://www.youtube.com/watch?v=AKRHGFPpUfE
 |
|
|
|
