| Author |
Topic: Emmons Legrande II minor repair work help |
Duane Becker
From:
Elk,Wa 99009 USA
|
Posted 16 Jul 2024 12:00 pm |
|
I have a friend who just purchased a Legrande II, serial no. 1755L. It has some issues and is in ok shape but is missing a bunch of the little E clips that hold the undercarriage rod to the bell crank. Anyone have these for sale? anyone bought them from local hardware store? I don't have a digital micrometer, but I"m assuming the rods are the 7/64. They all look the same diameter and look original.
May send this out to have cleaning/restoration done, who does this type of work on the Legrande II?
In the meantime want to get it at least back together with the E clips. |
|
|
 |
Kelcey ONeil
From:
Sevierville, TN
|
Posted 16 Jul 2024 3:04 pm
|
|
Duane,
We've got you covered, we'd be happy to help with a refurbishment
_________________
Co-owner and operator: Emmons Guitar Co. |
|
|
|
Duane Becker
From:
Elk,Wa 99009 USA
|
Posted 16 Jul 2024 4:13 pm
|
|
| Kelcey check your pm. |
|
|
|
Willie Sims
From:
PADUCAH, KY, USA
|
Posted 9 Sep 2024 9:06 am
|
|
| most hardware stores have push on clips orpush on nuts that work better.jost get the correct size. |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 9 Sep 2024 9:46 pm
|
|
Go with the Emmons factory E-Clips.
To maintain original Emmons setup.
The standard Emmons E clips are only .015 thick. Factory rod slot is about .020 wide. |
|
|
|
