Patrick Huey
From:
Nacogdoches, Texas, USA
|
Posted 21 Jun 2024 6:27 am |
|
Can anyone tell me which pots are in the Fender Steel King? I likely need to have some of mine replaced as I recall removing the chassis and discovering they are soldered to pcb , completely enclosed so you really can’t get Deoxit in them, and they have a long taper compared to standard pots I have read. Several of mine have become scratchy to the point that the “turn rapidly back n forth into infinity “ trick is no longer effective. I recall these are the same design as the Jazz King also but although I found a schematic I can’t find a parts list anywhere.
Thanks!
_________________
Pre RP Mullen D10 8/7, Zum 3/4, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/4, Fender Steel King, 2 Peavey Session 500's, Peavey Nashville 400, Boss DD-3, Profex-II, Hilton Digital Sustain, '88 Les Paul Custom,Epiphone MBIBG J-45, Fender Strat & Tele's, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!! |
|
