| Author |
Topic: Volume pedal pot wiring diagrams to install Dunlop Hot Potz |
Dave Magram
From:
San Jose, California, USA
|
Posted 30 Aug 2022 10:12 pm |
|
I could not find a clear wiring diagram for installing the Dunlop Hot Potz ll potentiometers in a volume pedal, so I made these.
The older, round Dunlop pots...
I revised the diagram a bit, mainly to show the round pot oriented the way it should be physically installed--because some volume pedals, like the Emmons pedal, may not have enough clearance for the wires to cross over each other.
I hope this revised drawing gives a better idea of what angle to solder the wires onto those little soldering pins on the round Dunlop pots.
--------------------------------------------------------------------------------------------------------------------
The newer, rectangular Dunlop pots...
Obviously, you can use whatever color wire that you want; I used the same colors that Dunlop used in their diagrams for consistency.
TIP: I have found it useful to orient the input and output jacks so that the inside of the tip prong (shown in orange on the diagram) faces the floor, in case I need to de-oxidize it with a Q-tip and a drop or two of contact cleaner or alcohol.
I hope you find these diagrams helpful.
(Thanks to Jim Palenscar for clarifying which lug was which for the newer rectangular Dunlop pots; I eventually found the "official" Dunlop wiring diagram with Google, and Jim had it exactly right!)
- Dave
Last edited by Dave Magram on 24 Nov 2023 10:13 am; edited 5 times in total |
|
|
 |
John LeMaster
From:
North Florida
|
Posted 31 Aug 2022 5:07 am Diagrams
|
|
Dave, those are EXCELLENT!
Thank you!!
John L.
_________________
Magnum D10, Emmons D10 push-pull |
|
|
|
Bill A. Moore
From:
Silver City, New Mexico, USA
|
Posted 31 Aug 2022 7:08 am
|
|
| +1 |
|
|
|
Jonathan Shacklock
From:
London, UK
|
Posted 10 Jun 2024 2:14 am
|
|
Belated thank you for these diagrams Dave!
Has anyone detected an audible difference between the round and newer rectangular versions? Is the taper the same? |
|
|
|
Steve Hinson
From:
Hendersonville Tn USA
|
Posted 10 Jun 2024 4:16 am Thanks!
|
|
This is great,Dave!Thanks!
SH |
|
|
|
