| Author |
Topic: Specific Front Leg Angle? |
Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 18 May 2024 8:59 pm |
|
Is there a specific front leg angle that is used on steel guitars?
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Boss 59 Fender pedal for preamp, NDR-5 Atlantic Delay & Reverb, two Quilter 201 amps, 2- 12" Eminence EPS-12C speakers, ShoBud Pedal, 1949 Epiphone D-8. Revelation preamp into a Crown XLS 1002 power amp. |
|
|
 |
Michael Yahl
From:
Troy, Texas!
|
Posted 19 May 2024 6:59 am
|
|
Dennis,
My research and checking Sho~Bud endplates shows about 11-12 degrees both front and rear.
Michael
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 19 May 2024 8:09 am
|
|
Thanks Michael
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Boss 59 Fender pedal for preamp, NDR-5 Atlantic Delay & Reverb, two Quilter 201 amps, 2- 12" Eminence EPS-12C speakers, ShoBud Pedal, 1949 Epiphone D-8. Revelation preamp into a Crown XLS 1002 power amp. |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
|
|
|
Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 19 May 2024 8:22 pm
|
|
Thanks Donnie. Seems like 10 degrees is standard. I'm not at home but will check the angles on my MSA this week. I'm planning a leg mount pedal board. I may configure an adjustable mount. Tossing around ideas.
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Boss 59 Fender pedal for preamp, NDR-5 Atlantic Delay & Reverb, two Quilter 201 amps, 2- 12" Eminence EPS-12C speakers, ShoBud Pedal, 1949 Epiphone D-8. Revelation preamp into a Crown XLS 1002 power amp. |
|
|
|
Steven Black
From:
Gahanna, Ohio, USA
|
Posted 21 May 2024 10:08 am Leg angle reply
|
|
| Yes most steels today are 10 degree angle. |
|
|
|
