| Author |
Topic: Please close - got a set from Mullen |
Lonnie Wells
From:
The Buckeye State
|
Posted 7 May 2024 3:32 pm |
|
Needing a set of standard height legs for an Emmons push pull.
I have a set of 1" underside to trade if interested but not necessary.
Last edited by Lonnie Wells on 21 May 2024 11:03 am; edited 1 time in total |
|
|
 |
Dave Grafe
From:
Hudson River Valley NY
|
Posted 7 May 2024 4:12 pm
|
|
| Mullen will sell you leg sets |
|
|
|
Lonnie Wells
From:
The Buckeye State
|
Posted 7 May 2024 5:43 pm
|
|
Thanks Dave. I'll check with Mullen if I don't find a set on here.
I'm wondering if most manufacturers use the same size socket threading and standard length on their legs? I just tried a set from my Carter and they seem to fit just fine in the Emmons. |
|
|
|
Dave Grafe
From:
Hudson River Valley NY
|
Posted 7 May 2024 8:16 pm
|
|
| Lonnie Wells wrote: |
Thanks Dave. I'll check with Mullen if I don't find a set on here.
I'm wondering if most manufacturers use the same size socket threading and standard length on their legs? I just tried a set from my Carter and they seem to fit just fine in the Emmons. |
Yes, while some makers have unique designs the leges on Emmons, Fessenden, Zumsteel, Mullen, Carter, and ShoBud guitars are all interchangeable, and I believe this is true for many more manufacturers. |
|
|
|
Gary Sill
From:
Mt. Zion, IL, USA
|
Posted 17 May 2024 7:01 am I have new legs on my website that will fit an Emmons
|
|
www.sillmusicsupply.com
_________________
A beautiful Laquer Mullen G2, 2 Nashville 112's, Evans 10" R150 Amp,1982 Emmons Push Pull D-10, Hilton Pedals, 12/8 MSA Superslide, Green LDG Sho-Bud-Owned by Lloyd, S-6 Fender 1956 Lap. , Gretsch Country Gentleman, red Gibson 2019, ES 335, Quilter, Gretsch Resonator, Eastman Mandolin |
|
|
|
