| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Altec 417 8h equivalent
Reply to topic
Author Topic:  Altec 417 8h equivalent
Bill Duncan


From:
Lenoir, North Carolina, USA
Post  Posted 24 Apr 2024 1:36 pm    
Reply with quote

Is there a modern equivalent to an Altec 417 8h?
_________________
You can observe a lot just by looking
View user's profile Send private message Send e-mail
Tim Whitlock


From:
Colorado, USA
Post  Posted 24 Apr 2024 2:36 pm    
Reply with quote

I had an Altec 418b in my Twin Reverb for many years until I couldn't lug it around anymore. I recently commissioned a tweed Tremolux clone with a Weber Neomag 12. To me it sounds nearly identical to the Altec. Lovely, smooth, addictive top end and sweet complex midrange!
View user's profile Send private message Send e-mail
Bill Duncan


From:
Lenoir, North Carolina, USA
Post  Posted 1 May 2024 2:46 am    
Reply with quote

Thanks for your information Tim. I spoke with Mojotone and they were very knowledgeable about the 417 8h Altec, and they have a speaker called Greyhound, at $139.00. For that price it is worth a try.
_________________
You can observe a lot just by looking
View user's profile Send private message Send e-mail
Dave Grafe


From:
Hudson River Valley NY
Post  Posted 2 May 2024 7:54 am    
Reply with quote

I am curious to hear your assessment of the Greyhound speaker, as there is sadly no known equivalent for the sweet sounding and highly efficient Altec 417/418 speakers, which are increasingly hard to come by.
View user's profile Send private message Send e-mail Visit poster's website
Bill Duncan


From:
Lenoir, North Carolina, USA
Post  Posted 29 May 2024 10:43 am    
Reply with quote

I received and installed the Mojotone 12" 8 ohm speaker. I installed it in a Valveking 112 50 watt tube amp powered by 6L6GC JJ tubes. I have done biasing and added a 17 inch 3 spring Mojotone reverb tank. I have been using a JBL D123 8 ohm speaker I did not like the green Valveking original to the amp. I decided on this Valveking 112 because of it's compact size and portability. I also got it cheap.

I have tried several other speakers and had plans to get a Altec 417 8. Which could still happen. I like Altecs and use 15" Altecs in my other amps.

After playing the Greyhound alone and with a band I am having good results. The Greyhound tends to round off the highs and bring out the bottom more. I am using the onboard bass, mids, and treble controls. I am using amp reverb and a small amount of delay. As of now I have the bass at about 3, the mids at 6, and treble at 7. The numbers are on a 1 to 10 scale I have not noticed any distortion.

I am NOT recommending the speaker or anything else. I am just giving MY thoughts and opinions. Of course yours my vary.

Admittedly, the Greyhound is aimed at guitar (rock) and not pedal steel. I do like it and it appears to be well made and does what Mojotone says. At $129.00 I thought it would be cheap enough and worth a try.

As I stated earlier, I am NOT recommending anything to anyone.
_________________
You can observe a lot just by looking
View user's profile Send private message Send e-mail
Bill Hatcher

 

From:
Atlanta Ga. USA
Post  Posted 29 May 2024 7:11 pm    
Reply with quote

you might try the weber alnico California. supposed to be JBL like.

the altec 417 and 418 series are incomparable to anything made today.


https://www.tedweber.com/cali12a/
View user's profile Send private message Send e-mail
Bill Duncan


From:
Lenoir, North Carolina, USA
Post  Posted 30 May 2024 2:55 am    
Reply with quote

[quote="Bill Hatcher"]you might try the weber alnico California. supposed to be JBL like.

the altec 417 and 418 series are incomparable to anything made today.

Bill, you are right.
_________________
You can observe a lot just by looking
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron