| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Gain levels for D.I. Out to P.A. Fishman Loudbox mini
Reply to topic
Author Topic:  Gain levels for D.I. Out to P.A. Fishman Loudbox mini
Brooks Montgomery


From:
Idaho, USA
Post  Posted 5 May 2024 10:48 am    
Reply with quote

Is there a general rule of thumb for how high to set the gain knobs for the signal going to the P.A.?
For gigs, (Dobro and Weissenborn with pickups), I’m using a Fishman Loudbox mini amp with D. I. out to the P. A. , as are two other musicians that I am gigging with (guitars and fiddle).

On the Fishman Loudbox mini, the Master, when using the D.I. out, controls how much sound comes out of the amp speaker (so it works as a monitor of sorts).
_________________
A banjo, like a pet monkey, seems like a good idea at first.
View user's profile Send private message Send e-mail
Stew Crookes


From:
Paris, France
Post  Posted 5 May 2024 9:52 pm    
Reply with quote

Seeing as the master also controls your monitor level, I’d concern myself with that primarily and there should be a workable level coming out the direct output of a well designed device such as the loudbox at any reasonable volume setting. I use a Quilter SuperBlock (and a Nashville 112 before that) and it’s the same scenario - I’ve never had anyone at the mixing board tell me the direct out was too loud or too quiet.

When there’s no ‘amplification’ involved, a good starting point for clean sound on devices with both gain/master controls is to put the master around 3/4 of the way up, and use just as much gain as you need to get a workable level at the mixer and adjust from there if needed.
_________________
Music mixer, producer and pedal steel guitarist

stewcrookes.com
View user's profile Send private message Send e-mail Visit poster's website
Brooks Montgomery


From:
Idaho, USA
Post  Posted 6 May 2024 5:59 am    
Reply with quote

Thanks Stew.
_________________
A banjo, like a pet monkey, seems like a good idea at first.
View user's profile Send private message Send e-mail
Howard Parker


From:
Maryland
Post  Posted 6 May 2024 6:25 am    
Reply with quote

According to the manual's block diagram the master level will not effect the DI output level (as expected).

So set the input gain for an adequate signal to the PA and set the master for suitable stage volume and you should be good to go.

hp
_________________
Howard Parker

03\' Carter D-10
70\'s Dekley D-10
52\' Fender Custom
Many guitars by Paul Beard
Listowner Resoguit-L
View user's profile Send private message Send e-mail Visit poster's website
Brooks Montgomery


From:
Idaho, USA
Post  Posted 6 May 2024 6:54 am    
Reply with quote

Thank you Howard.
_________________
A banjo, like a pet monkey, seems like a good idea at first.
View user's profile Send private message Send e-mail
Stew Crookes


From:
Paris, France
Post  Posted 6 May 2024 7:45 am    
Reply with quote

Oops - I misunderstood and thought the Loudbox DI output was post master volume the way it is on my Quilter Embarassed
_________________
Music mixer, producer and pedal steel guitarist

stewcrookes.com
View user's profile Send private message Send e-mail Visit poster's website
Howard Parker


From:
Maryland
Post  Posted 6 May 2024 2:10 pm    
Reply with quote




Looks like the master controls only the power amp section.
View user's profile Send private message Send e-mail Visit poster's website
Brooks Montgomery


From:
Idaho, USA
Post  Posted 6 May 2024 2:57 pm    
Reply with quote

Thanks Howard. As confused as I am by electronics, that schematic really is helpful in understanding “the flow”.
_________________
A banjo, like a pet monkey, seems like a good idea at first.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron