Author |
Topic: knee levers for 3/8 square shafts |
ebb
From: nj
|
Posted 2 May 2024 6:50 pm
|
|
thank you
ed |
|
|
|
Jerry Overstreet
From: Louisville Ky
|
Posted 3 May 2024 6:47 am
|
|
Hi ebb...probably need to be more specific 'bout what you need...type of guitar and/or design of mechanics...whole kit with hubs, mounts, rods etc... just some specific parts. |
|
|
|
ebb
From: nj
|
Posted 3 May 2024 7:16 am
|
|
what ever i can get. i am retrofitting for an old fender and have some square cross shafts from williams with delrin mounts and slotted bell cranks. if i can find some levers that fit 3/8 square cross shafts i have materials to start to try things |
|
|
|
Barry Coker
From: Bagley Alabama, USA
|
Posted 3 May 2024 10:59 am knee lever
|
|
I can Make you some like these:
Barry _________________ Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|
ebb
From: nj
|
Posted 3 May 2024 11:23 am
|
|
that would be great! can you show a pic of one attached to cross shat? |
|
|
|
Barry Coker
From: Bagley Alabama, USA
|
Posted 3 May 2024 1:35 pm
|
|
These are pics of free standing pull and reliece the only diffrence is the crank that clamps to yhe cross shaft.
_________________ Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|