| Author |
Topic: Mini amps class D |
Jack Dougherty
From:
Spring Hill, Florida, USA
|
Posted 20 May 2024 11:52 am |
|
Ianyone using or used a class D bass amp for steel
_________________
There is no such thing as too many steels!!
Emmons P/P 8/7 Strings....whatever I have.....Picks..mixed...Bars...one of four..but I like the Bullet Bar
Walker Stereo Steel Amp
TC M1 XL
Peavey Nashville 400. Fox Mod
Various sundries and toys..
Last edited by Jack Dougherty on 22 May 2024 4:49 am; edited 2 times in total |
|
|
 |
Larry Dering
From:
Missouri, USA
|
Posted 21 May 2024 6:32 pm
|
|
| Jack, not sure what you are calling a class 2 amp? Could that be a class D? Any specific model in mind. There were a few posts about those in a bass mini amp. |
|
|
|
Jack Dougherty
From:
Spring Hill, Florida, USA
|
Posted 22 May 2024 4:48 am
|
|
Larry thanks for the heads up ….yes class D
_________________
There is no such thing as too many steels!!
Emmons P/P 8/7 Strings....whatever I have.....Picks..mixed...Bars...one of four..but I like the Bullet Bar
Walker Stereo Steel Amp
TC M1 XL
Peavey Nashville 400. Fox Mod
Various sundries and toys.. |
|
|
|
Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 22 May 2024 5:22 am
|
|
There are several posts about specific mini bass amps on the forum. TC Electronic BAM, Elf, Quilter Tone Block (201, 202) and more. Try the forum search engine.
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Carbon Copy Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8. |
|
|
|
Ron Hogan
From:
Nashville, TN, usa
|
Posted 22 May 2024 7:15 am
|
|
| Larry. I use the BAM200 and like it as one of my backup amps. Light, powerful and reasonable. |
|
|
|
Brad Sarno
From:
St. Louis, MO USA
|
Posted 23 May 2024 7:54 am
|
|
I find that most of these affordable compact class-d bass heads, while pretty impressive on bass, aren't really tweaked for the sweet treble that's so critical for pedal steel. These critical highs were not the priority of these budget bass amp designs. They're not bad, but they will leave most of us wanting a more lush midrange and a much sweeter treble.
Brad |
|
|
|
Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 23 May 2024 10:30 am
|
|
I have one rig consisting of Revelation and Crown Class D stereo power amp.
Another, Quilter 201 with an added MXR M81 preamp pedal and get good results. I use this one for band practice because it's in a small rack case and light weight along with a 12 inch Eminence neo spkr.
Another, most recent, I upgraded (mod'ed) my 1974 Session 400 with Sarno parts recommendation and replaced all of the Molex pins and soldered them to the wires. It's basically a "new" first year Session 400. Killer tone and dead quiet.
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Carbon Copy Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8. |
|
|
|
