| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Sho~Bud Knee Lever Kits
Reply to topic
Author Topic:  Sho~Bud Knee Lever Kits
Lynn Stafford


From:
Ridgefield, WA USA
Post  Posted 7 Dec 2014 8:15 am    
Reply with quote

I'm in the process of restoring a 70's Sho~Bud #6139 S-10 with a rack and barrel under carriage (see photos below)







As you can see, It only has the original single RKL. My customer desires to have four total levers, so I'm looking for parts to make kits from.

I bought one "right" lever ass'y shown below from someone on eBay.



Below is what I now need:

(1) Rack ass'y for the "right" lever ass'y I now have that matches the existing racks.
(1) Complete kit for a "right" lever that matches the existing parts.
(1) Complete kit for a "left" lever that matches the existing parts.


Please email me with what you have and how much you want for your parts.
_________________
Best regards,
Lynn Stafford

STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)

Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)

ZumSteel Authorized Service Technician
----------------------------------
View user's profile Send private message Send e-mail Visit poster's website
Craig A Davidson


From:
Wisconsin Rapids, Wisconsin USA
Post  Posted 7 Dec 2014 8:48 am    
Reply with quote

Check with James Morehouse. He has been under the weather a bit but might be able to help you out.
View user's profile Send private message Send e-mail Visit poster's website
Paul Norman

 

From:
Washington, North Carolina, USA
Post  Posted 7 Dec 2014 5:05 pm    
Reply with quote

James Morehead.
View user's profile Send private message Send e-mail
Michael Yahl


From:
Troy, Texas!
Post  Posted 8 Dec 2014 6:41 pm    
Reply with quote

I can cover ya Lynn. Gimme a call.
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp

PSG PARTS
http://www.psgparts.com/
View user's profile Send private message Send e-mail Visit poster's website
James Morehead


From:
Prague, Oklahoma, USA - R.I.P.
Post  Posted 9 Dec 2014 6:50 am    
Reply with quote

Lynn, Are you not getting my emails? I've been waiting for you to get back with me about your request. Rolling Eyes
_________________
"Good judgement comes from experience, and a lot of that comes from bad judgement"~old cowboy proverb.
shobud@windstream.net
View user's profile Send private message Send e-mail
Lynn Stafford


From:
Ridgefield, WA USA
Post  Posted 9 Dec 2014 9:40 am    
Reply with quote

Hi James,

Thanks for posting. Hopefully, that means you're feeling better Very Happy

Yes, I did receive your two emails on Sunday but had a steel jam to attend that day and wasn't able to reply that evening. I'm sorry, but I've just have had a lot on my plate lately. I have needed to pack up a guitar to ship the Netherlands this afternoon, pick up another one from Los Angeles and then run a few errands, so I have a fairly busy schedule today also.

Someone has sent me a rack ass'y which should arrive any day now. As soon as I have it, I'll be able to determine where I can use it on this guitar. I'll then be able to compile a detailed list of parts to order.

Hopefully, between you and Michael I'll be able to get everything I need for this project!
_________________
Best regards,
Lynn Stafford

STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)

Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)

ZumSteel Authorized Service Technician
----------------------------------
View user's profile Send private message Send e-mail Visit poster's website
James Morehead


From:
Prague, Oklahoma, USA - R.I.P.
Post  Posted 9 Dec 2014 10:50 am    
Reply with quote

Cool enough, my Friend. I just wanted to make sure you were recieving my emails and not waiting on me to respond. And yes, each day, I gain back a little health!! Very Happy
_________________
"Good judgement comes from experience, and a lot of that comes from bad judgement"~old cowboy proverb.
shobud@windstream.net
View user's profile Send private message Send e-mail
Brian LeBlanc


From:
Falls Church, Virginia, USA
Post  Posted 14 Apr 2024 7:30 am     6139....kneezz
Reply with quote

know this is old...
i've got 2 39's
both need E raise lever kits
?
_________________
'Frenchy' LeBlanc...
ShoBud & Twins
View user's profile Send private message Send e-mail
Dave Grafe


From:
Hudson River Valley NY
Post  Posted 14 Apr 2024 9:35 am     Re: 6139....kneezz
Reply with quote

Brian LeBlanc wrote:
know this is old...
i've got 2 39's
both need E raise lever kits
?


If you have needs it would probably be best to post your own thread Brian, rather than piggy-backing on this decade old post. Lynn is no longer working on instruments or able to answer messages and at this point it would be best to avoid any and all misunderstandings in that regard.

Best of luck in your quest.
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron