| Author |
Topic: Amp stand/tilt legs for Peavey Session 500? |
Travis Bubenik
From:
Marfa, Texas
|
Posted 22 Mar 2024 1:20 pm |
|
Any of y'all have recommendations for an amp stand/tilt back legs/etc. to use for a Peavey Session 500 - something durable enough to handle these beasts?
I usually play live with a Fender twin tilted back on its legs. Mine's out of commission and so I've been using the Session, but I have kinda bad hearing and find it hard to hear myself without the amp tilted up at me a bit. Setting it up on a milk crate feels too risky just given how big they are...
Any tips welcome. |
|
|
 |
Dave Hopping
From:
Aurora, Colorado
|
Posted 22 Mar 2024 1:46 pm
|
|
When I was using my Session 500 on stage I always put it on a milk crate. Never had any problems.
 |
|
|
|
Travis Bubenik
From:
Marfa, Texas
|
Posted 22 Mar 2024 1:52 pm
|
|
| Dave Hopping wrote: |
When I was using my Session 500 on stage I always put it on a milk crate. Never had any problems.
|
Okay maybe I’ll do that, I’m just so terrified of that thing tipping over and crushing itself with its own weight, hah! |
|
|
|
Donn Lewis
From:
Maryland, USA
|
Posted 22 Mar 2024 2:10 pm
|
|
This: https://www.mudstand.com/
_________________
Mullen Discovery 3x4
Milkman half and half 12" combo
Goodrich 120, Steeler's choice seat, Mud Stand, BJ's bar, Peterson Strobostomp HD |
|
|
|
William Baldwin
From:
North Carolina, USA
|
Posted 24 Mar 2024 8:36 am
|
|
| What ever those are that Guitar Center carries, I've used them with my 500 with no issues |
|
|
|
