Author |
Topic: Good But Inexpensive |
Carl McLaughlin
From: St.Stephen,New Brunswick,Can
|
Posted 12 Mar 2024 11:21 am
|
|
All guitars for sale on here are good as far as US$ are but with shipping ,duty ,shipping, dollar diff. I am sur there are a lot of us Canadians would like to see a guitar that we can afford without a bank loan.
I would like to see a pedal steel for a beginner like me, with 2-3 pedals 2 knee levers in a price range of 1500-2000 Canadian $ ,is this possible.? _________________ I have a Tele plus telecaster, Larrivee acoustic. Also have a Fender resonator guitar with new Quarterman cone and spider, and an Allan tailpiece .Playing through a Fender Super Champ XD, using a little delay on the amp and a Harmonix Holy Grail Echo pedal, set on Hall turned to about 1pm.Just got a Fender Dual 6 Stringmaster style. Bought a Yamaha FGX5 Recently and love it. Recently got a Sho-NUFF 6 string pedal steel in open G.Still learning. |
|
|
![](templates/respond/images/spacer.gif) |
Bob Tuttle
From: Republic, MO 65738
|
Posted 12 Mar 2024 11:37 am
|
|
Check out the Stage One steels. |
|
|
![](templates/respond/images/spacer.gif) |
Carl McLaughlin
From: St.Stephen,New Brunswick,Can
|
Posted 12 Mar 2024 11:39 am Inexpensive
|
|
Thanks Bob _________________ I have a Tele plus telecaster, Larrivee acoustic. Also have a Fender resonator guitar with new Quarterman cone and spider, and an Allan tailpiece .Playing through a Fender Super Champ XD, using a little delay on the amp and a Harmonix Holy Grail Echo pedal, set on Hall turned to about 1pm.Just got a Fender Dual 6 Stringmaster style. Bought a Yamaha FGX5 Recently and love it. Recently got a Sho-NUFF 6 string pedal steel in open G.Still learning. |
|
|
![](templates/respond/images/spacer.gif) |
Jim Pollard
From: Cedar Park, Texas, USA
|
|
|
![](templates/respond/images/spacer.gif) |
Mike McBride
From: Indiana
|
Posted 12 Mar 2024 5:41 pm
|
|
What expenses does one incur when shipping to Canada? |
|
|
![](templates/respond/images/spacer.gif) |
Wayne Brown
From: Bassano, Alberta, Canada
|
Posted 13 Mar 2024 2:22 am steel guitar
|
|
Hi Carl We at Outwest have been in the Steel business for over 25 years. The price your asking about is a little to low other than used. You must remember that these are machines and every piece has to be made, and used to be built in small shops. Normally not in a assembly line. If Al Brisco is still watching this thread you might want to reach out to him as he had a "Brisco Bud" for i think around that price point (not sure on that). This was his own design.
Used there was the:
Carter Starter,and Carter S-10, Sho-bud Maverick, And lots of used older S-10s on the market.You might be able to stumble into something like those. But there is not much listed up here right now. We keep a close eye on that.
New ...well there is a problem with wait time and because of per unit costs to build a steel they are higher in cost than your suggested price.
Standard set up now a days is either a S-10 or SD-10 with 3 and 5. I will be building a Lacquer one this year and the price point comes in at around $4500.00 CAD.
These guitars are very Time consuming to build and when you factor in the complete cost with the time to build one. there is not a lot of profit to be had. It is more of the love of the instrument.
Thanks
Wayne _________________ Owner Out West Music,Seats,Parts and accessories
www.outwestcountry.ca |
|
|
![](templates/respond/images/spacer.gif) |
Jack Hanson
From: San Luis Valley, USA
|
Posted 13 Mar 2024 7:27 am
|
|
You can get good, and you can get cheap. But the combo platter might be another story. Good luck! |
|
|
![](templates/respond/images/spacer.gif) |