| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Acoustic Guitar Simulator
Reply to topic
Author Topic:  Acoustic Guitar Simulator
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 3 Mar 2024 12:50 pm    
Reply with quote

A friend of mine injured a couple of fingers on his left hand a few years ago. They are as healed as much as they will; but, it's getting harder and harder for him to play his acoustic guitars.

I'm wondering if maybe he should switch over to a solid body electric guitar, with lighter strings/action, and use an acoustic guitar simulator.

I was just looking at a simulator made by NUX. It is way over complicated for this guy.

Any thoughts?

By the way, this is strictly for chord strumming.

~Lee
View user's profile Send private message Send e-mail
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 3 Mar 2024 12:59 pm    
Reply with quote

Perhaps there are acoustic/ electric guitars with an electric guitar neck?
View user's profile Send private message Send e-mail
Mike Auman


From:
North Texas, USA
Post  Posted 3 Mar 2024 1:28 pm    
Reply with quote

It's not so much the neck as the action, since acoustic guitars often have higher actions than electrics.
For a left hand injury, there are some possible ways to make his current acoustic guitars easier to fret:

1. Tune down one fret and put a capo on the 1st fret. Some acoustic guitars have an excessively high nut to prevent buzz, requiring more finger strength unless you add a capo.
2. Have a luthier set up the guitar for the lowest possible action, including nut height, saddle height, neck relief, and string gauge.
3. Replace the nut with a Zero Glide nut, which is a zero-fret, giving you the same lower action as a capo. Best done by a luthier for acoustic guitars, there are different models and sizes for different guitar brands. Neck relief may need to be adjusted, but not usually.
_________________
Long-time guitar player, now wrestling with lap steel.
View user's profile Send private message Send e-mail
Chris Templeton


From:
The Green Mountain State
Post  Posted 6 Mar 2024 5:08 am    
Reply with quote

Nylon string guitar?
_________________
Excel 3/4 Pedal With An 8 String Hawaiian Neck, Sierra Tapper (10 string with a raised fretboard to fret with fingers), Single neck Fessenden 3/5
"The Tapper" : https://christophertempleton.bandcamp.com/album/the-tapper
Soundcloud Playlist: https://soundcloud.com/bluespruce8:
View user's profile Send private message
Darvin Willhoite


From:
Roxton, Tx. USA
Post  Posted 6 Mar 2024 8:38 pm    
Reply with quote

I have a Godin Multiac steel string acoustic electric. It has a thin chambered body and plays as good as most electrics. It has a nice acoustic electric sound. They pop up pretty often on Ebay and Reverb.
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro.
View user's profile Send private message Send e-mail
John Larson


From:
Pennsyltucky, USA
Post  Posted 7 Mar 2024 3:27 am    
Reply with quote

Taylor T5
_________________
Rejoice in the Lord, O ye righteous; praise is meet for the upright. Give praise to the Lord with the harp, chant unto Him with the ten-stringed psaltery. Sing unto Him a new song, chant well unto Him with jubilation. For the word of the Lord is true, and all His works are in faithfulness. The Lord loveth mercy and judgement; the earth is full of the mercy of the Lord.
- Psalm 33:1-5
View user's profile Send private message
Darvin Willhoite


From:
Roxton, Tx. USA
Post  Posted 7 Mar 2024 5:08 am    
Reply with quote

I’ve had two Taylor T5’s and I never could get an acoustic sound I liked, the Godin gave me that sound right out of the box. I’ve had a couple of Taylor acoustics with the new, three knob preamp (I forget what they call it) and I never cared for them either. I like Taylor’s old Fishman preamp/EQ system much better.
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro.
View user's profile Send private message Send e-mail
Walter Killam


From:
Nebraska, USA
Post  Posted 7 Mar 2024 8:43 pm     Try a Zager
Reply with quote

I love my Zager ZAD50 ez play guitar. It doesn't project like a Martin, but with decent pickup installed all I have to do is turn up the volume.

In addendum, I use a boss acoustic simulator on my pedalboard, in conjunction with splitting the neck coil, and trying to remember to play like an acoustic rhythm guitar it does a passable job, but it's not the same as my Zager, I can tell it's a simulator.

YMMV
_________________
Mostly junque with a few knick-knacks that I really can't do without!
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron