| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Extended length pedals on my Derby.
Reply to topic
Author Topic:  Extended length pedals on my Derby.
Johnie King


From:
Tennessee, USA
Post  Posted 6 Feb 2024 8:55 pm    
Reply with quote

I know this subject has been discussed before but this is the first steel I’ve had in my shop with extended pedals an it’s a joy too play.


The Extended Derby pedals sure make for easy pedaling!!

You could pedal for hours in your sock feet.

Extended pedals might help are fellow steel players with neuropathy in their feet.


Last edited by Johnie King on 6 Feb 2024 9:13 pm; edited 4 times in total
View user's profile Send private message Send e-mail
Johnie King


From:
Tennessee, USA
Post  Posted 6 Feb 2024 8:57 pm    
Reply with quote

Standard derby pedals


View user's profile Send private message Send e-mail
Johnie King


From:
Tennessee, USA
Post  Posted 6 Feb 2024 9:06 pm    
Reply with quote

Extended Derby pedals.

View user's profile Send private message Send e-mail
Johnie King


From:
Tennessee, USA
Post  Posted 6 Feb 2024 9:14 pm    
Reply with quote

The black Derby pictured has the extended pedals.


View user's profile Send private message Send e-mail
Johnie King


From:
Tennessee, USA
Post  Posted 6 Feb 2024 9:29 pm    
Reply with quote

Pictures from the forum on this subject.

View user's profile Send private message Send e-mail
Mike DiAlesandro


From:
Kent, Ohio
Post  Posted 8 Feb 2024 1:20 pm     Re: Extended length pedals on my Derby.
Reply with quote

Quote:
"Johnie King"

Extended pedals might help our fellow steel players with neuropathy in their feet.


That’s a great point you make Johnie. I have run into many players that have this issue. It sure is worth the effort to let them know about this. 👍
View user's profile Send private message Send e-mail Visit poster's website
Bobby D. Jones

 

From:
West Virginia, USA
Post  Posted 8 Feb 2024 9:17 pm    
Reply with quote

Long pedals would be nice using boots with long sharp toes. But with the leverage ratio near doubled on pedal, With a heavy foot, Could cause more pressure on the cabinet, And cause more cabinet drop.

Another, Help one way, Hurt something else at same time, The problem when figuring leverages on a steel guitar.
View user's profile Send private message Send e-mail
Johnie King


From:
Tennessee, USA
Post  Posted 8 Feb 2024 9:21 pm    
Reply with quote

Thanks Mike yes for some of my pedal steel friends this definitely helps.
View user's profile Send private message Send e-mail
Dan Behringer

 

From:
Jerseyville, Illinois
Post  Posted 19 Feb 2024 5:22 pm    
Reply with quote

Found this pic on Reverb and I thought it was an amazing idea. This Wheeler PSG has adjustable collars on the pedals to change the leverage.
[img]
[/img]
View user's profile Send private message Send e-mail
Tommy Mc


From:
Middlesex VT
Post  Posted 20 Feb 2024 6:36 am    
Reply with quote

Where does one acquire these extended pedals for a Derby?
_________________
1980 MSA Vintage XL S-10, 1975 Session 400
1972 Dobro model 66s
Derby SD-10
Tom McDonough
View user's profile Send private message Send e-mail
Steve Mueller

 

From:
Cincinnati, Ohio, USA
Post  Posted 20 Feb 2024 11:40 am    
Reply with quote

Another option - keep the same pedals and drill new hole for the connector 1/4" or so closer to the pedal bar. No expense and just as effective. Have had this done on all my steels. Works great!
_________________
2016 Williams D12 8 x 8, 2015 Williams D12 8 x 8, 2023 Williams S12 4 x 5, Milkman Amps, 1974 Gibson Byrdland
View user's profile Send private message Send e-mail
chuck lemasters

 

From:
Jacksonburg, WV
Post  Posted 20 Feb 2024 2:21 pm    
Reply with quote

I owned this guitar. I bought a piece of aluminum stock from Ace Home Center. I cut the pads off the end of the pedals, cut short pieces of the aluminum, and my Bro-in-law, an excellent welder, put them together. Those stubby pedals don’t work too well with size 12 shoes.

https://www.youtube.com/watch?v=l4WMKWKctd8

Here is a video I was asked to play for using the Derby
View user's profile Send private message Send e-mail
Tommy Mc


From:
Middlesex VT
Post  Posted 22 Feb 2024 4:10 pm    
Reply with quote

Steve Mueller wrote:
Another option - keep the same pedals and drill new hole for the connector 1/4" or so closer to the pedal bar. No expense and just as effective. Have had this done on all my steels. Works great!


How does that affect travel and pressure?
_________________
1980 MSA Vintage XL S-10, 1975 Session 400
1972 Dobro model 66s
Derby SD-10
Tom McDonough
View user's profile Send private message Send e-mail
Steve Mueller

 

From:
Cincinnati, Ohio, USA
Post  Posted 23 Feb 2024 7:40 am    
Reply with quote

Tommy,
Full disclosure, I removed the pedals and sent them to Bill Rudolph to re-drill the pedal rod connector 1/4" closer to the pedal board. He recommended the 1/4" because that small amount is unlikely to require a change to the bell crank slot. After reinstalling the pedals, I just did minor tweaks tuning the pedals at the endplate and that was it. Easy.
To answer your question directly, less pressure/smoother pedal action, slightly more travel.
I have temperment comps on E9 1 and 7 on A pedal. The new pedal connection location removed any additional stiffness from having 2 raises and 2 lowers on one pedal. I had all pedals on both necks re-drilled as well as ordering my newer S12 that way. Smooth all around.
_________________
2016 Williams D12 8 x 8, 2015 Williams D12 8 x 8, 2023 Williams S12 4 x 5, Milkman Amps, 1974 Gibson Byrdland


Last edited by Steve Mueller on 23 Feb 2024 8:18 pm; edited 1 time in total
View user's profile Send private message Send e-mail
John Hyland

 

From:
South Australia
Post  Posted 23 Feb 2024 1:10 pm    
Reply with quote

Tommy Mc wrote:
Steve Mueller wrote:
Another option - keep the same pedals and drill new hole for the connector 1/4" or so closer to the pedal bar. No expense and just as effective. Have had this done on all my steels. Works great!


How does that affect travel and pressure?

It’s all about the distance the rod connection point moves. Closer to the axle the whole pedal has to move further to get the same rod movement. More pedal movement means the stress of the load is spread out over the greater distance. (Ie easier) but too close to the axle is bad as the overal pedal movement will be extreme. That said the ¼ inch relocation would need to be very carefully drilled so the new hole is not part of the existing one.
View user's profile Send private message Send e-mail
Willie Sims

 

From:
PADUCAH, KY, USA
Post  Posted 1 Mar 2024 2:27 pm    
Reply with quote

see if you can find my post about easy pedal extenders,you can save a lot money.
View user's profile Send private message

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron