| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Does anyone know where to get bars smoothed/polished?
Reply to topic
Author Topic:  Does anyone know where to get bars smoothed/polished?
Mike Neer


From:
NJ
Post  Posted 2 Feb 2024 11:40 am    
Reply with quote

I've got a few steel bars that have some imperfections/ridges that I would like to have smoothed out.
Anyone have any suggestions how to have this done commercially?


_________________
Links to streaming music, websites, YouTube: Links
View user's profile Send private message Send e-mail Visit poster's website
Bill Groner


From:
QUAKERTOWN, PA
Post  Posted 2 Feb 2024 12:39 pm    
Reply with quote

The one pictured looks like it's chrome plated?? To polish the grooves out, the plating has to come off. The ridges are in the core and the plating only mimics' what is there. Is it a bar you are really fond of? It would be a pretty expensive process, to strip it down, polish it and get it re chromed. EPA has cracked down on plating, and price of a good chrome job isn't cheap. I guess that's my opinion on your bar. Unless it's sentimental or something like that, it might not be cost effective to refurbish it.
_________________
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
View user's profile Send private message Send e-mail
Mike Neer


From:
NJ
Post  Posted 2 Feb 2024 12:46 pm    
Reply with quote

Maybe I’d be better off getting them powder coated. Thoughts on that?
_________________
Links to streaming music, websites, YouTube: Links
View user's profile Send private message Send e-mail Visit poster's website
Bill Groner


From:
QUAKERTOWN, PA
Post  Posted 2 Feb 2024 1:10 pm    
Reply with quote

That is the same thing. Powder coating mimics the underlying problem.
_________________
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
View user's profile Send private message Send e-mail
Bill Hatcher

 

From:
Atlanta Ga. USA
Post  Posted 4 Feb 2024 6:33 am    
Reply with quote

Find a machine shop. Might cost as much as a new bar.

If you need chrome plating, find a motorcycle shop. They will know who does plating.
View user's profile Send private message Send e-mail
Andy Volk


From:
Boston, MA
Post  Posted 5 Feb 2024 3:15 am    
Reply with quote

Personally, I'd replace the bar with a new Clinesmith bar - might not be worth the time and effort to find a dinosaur machinist to do it.
_________________
Steel Guitar Books! Website: www.volkmediabooks.com
View user's profile Send private message Send e-mail Visit poster's website
Mike Neer


From:
NJ
Post  Posted 5 Feb 2024 4:46 am    
Reply with quote

Andy Volk wrote:
Personally, I'd replace the bar with a new Clinesmith bar - might not be worth the time and effort to find a dinosaur machinist to do it.


The problem is this bar is a 5/8" diameter bar, so it's probably not an available size.
PS: if anyone has any skinny bars (5/8" diameter and at least 3" in length, I'm interested).
_________________
Links to streaming music, websites, YouTube: Links
View user's profile Send private message Send e-mail Visit poster's website
Tony Oresteen


From:
Georgia, USA
Post  Posted 5 Feb 2024 9:06 am    
Reply with quote

Mike,

If you have a drill press, swap out the chuck to a 3/4" chuck and put your bar in it. Then you can polish it to your heart's content.
_________________
Tony
Newnan, GA

Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8
View user's profile Send private message Send e-mail
Thomas Nehrenberg

 

From:
Germany
Post  Posted 6 Feb 2024 2:55 am    
Reply with quote

Hi Mike!
Aren't Basil Henriques products are serious consideration?!
_________________
Wildwood Guitars D8 Console, Epiphone Electar Century 1939 Lap Steel, Fender Excelsior, Peavy Classic 30, Fender Champ...mostly A6 & E13th
View user's profile Send private message Send e-mail
Mike Neer


From:
NJ
Post  Posted 6 Feb 2024 4:43 am    
Reply with quote

Thomas Nehrenberg wrote:
Hi Mike!
Aren't Basil Henriques products are serious consideration?!


Hi Thomas, I'm sure they're great and I have several of the better bars like Clinesmith and BJS, but the bars I am looking for are 5/8" in diameter, which I don't believe is offered. I could be wrong though.
_________________
Links to streaming music, websites, YouTube: Links
View user's profile Send private message Send e-mail Visit poster's website
Thomas Nehrenberg

 

From:
Germany
Post  Posted 6 Feb 2024 4:59 am    
Reply with quote

Mike Neer wrote:
Thomas Nehrenberg wrote:
Hi Mike!
Aren't Basil Henriques products are serious consideration?!


Hi Thomas, I'm sure they're great and I have several of the better bars like Clinesmith and BJS, but the bars I am looking for are 5/8" in diameter, which I don't believe is offered. I could be wrong though.


Hi Mike!

I am pretty sure Basil would produce your bar customized to every dimension (incl. weight) you wish (maybe you want to contact him here via the forum and check if he has got capacities right now? I find him a great guy to deal with, but whom I tell Winking...I asume you know him far better than most of us ever will Wink )

Anyway, I don't believe anyone would be dissatified with his smooth gliding, noiseless bars which never want to slip out of your hands

All the best fpr you Mike!
_________________
Wildwood Guitars D8 Console, Epiphone Electar Century 1939 Lap Steel, Fender Excelsior, Peavy Classic 30, Fender Champ...mostly A6 & E13th
View user's profile Send private message Send e-mail
Rick Aiello


From:
Berryville, VA USA
Post  Posted 6 Feb 2024 9:13 am    
Reply with quote

The SGF sells 5/8" x 2 3/4" John Pearse Cryogenically treated bars ... I have one ... excellent quality

https://www.steelguitarshopper.com/john-pearse-thermo-cryonic-tone-bar-hindustani-slide/


Baz offers a smaller diameter but longer copolymer acetal bar too ...

Manish Pingle "Hindustani" 12mm x 118mm ... 96 g ... about 0.47" x 4.6"
View user's profile Send private message Send e-mail Visit poster's website
Bill Groner


From:
QUAKERTOWN, PA
Post  Posted 6 Feb 2024 9:32 am    
Reply with quote

Tony Oresteen wrote:
Mike,

If you have a drill press, swap out the chuck to a 3/4" chuck and put your bar in it. Then you can polish it to your heart's content.


If you stay at it long enough.......you can achieve the 5/8" diameter you are after. Whoa! Whoa!

_________________
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
View user's profile Send private message Send e-mail
Larry Allen


From:
Kapaa, Kauai,Hawaii
Post  Posted 6 Feb 2024 4:23 pm     Polish
Reply with quote

Aloha Mike, I use one of these for my bars and mouthpieces, etc., different rouges..

_________________
Excel steels & Peavey amps,Old Chevys & Motorcycles & Women on the Trashy Side
View user's profile Send private message Send e-mail
Nic Neufeld


From:
Kansas City, Missouri
Post  Posted 6 Feb 2024 6:34 pm    
Reply with quote

I would really recommend at least reaching out to Basil...he does a lot of different bar dimensions, including unique ones for Hindustani style slide. They tend to be pretty skinny.

He lists one as:
Manish Pingle Jr. Indian tone bar 118mm x 12mm 1” knurled 50gm lead core £75 was $125

If that is 12mm width at the end its pretty narrow...
_________________
Waikīkī, at night when the shadows are falling
I hear the rolling surf calling
Calling and calling to me
View user's profile Send private message Send e-mail
Larry Allen


From:
Kapaa, Kauai,Hawaii
Post  Posted 6 Feb 2024 6:53 pm     Bars
Reply with quote

I use the JP Bhattachurya Hindustani 5/8x2 3/4” for my 7 string Weissenborn (1 3/4 ‘string width at the nut.) . great for that guitar ..too short for my laps. Very Happy


_________________
Excel steels & Peavey amps,Old Chevys & Motorcycles & Women on the Trashy Side
View user's profile Send private message Send e-mail
Norman Evans


From:
Tennessee
Post  Posted 7 Feb 2024 6:09 am    
Reply with quote

Would this one work?
https://www.amazon.com/Cutaway-Roundnose-Slide-Dobro-Steel/dp/B078JV9ZZ4/ref=sr_1_12?keywords=dobro+tone+bar&qid=1707314885&sr=8-12
View user's profile Send private message Send e-mail
rodger_mcbride


From:
Minnesota
Post  Posted 7 Feb 2024 9:58 am     Tapered bar?
Reply with quote

I use a Gryphon Strings tapered bar that's a duplicate of the old Chase bar in Stainless steel on all my 8 string steels. 31/8" long, 3/4" at the fat end and 5/8" at the rounded tip. The end is concave too. No plating to wear or pit.
I have a slightly bigger tapered bar from Basil that I use on a T8 pedal guitar.
I also have an Amos titanium bar, again a Chase copy, but no concave end. Lighter than steel, but wrist slants only.
View user's profile Send private message Send e-mail
Mike Neer


From:
NJ
Post  Posted 7 Feb 2024 10:41 am    
Reply with quote

Is there an easy way to tell if a bar has been plated?
_________________
Links to streaming music, websites, YouTube: Links
View user's profile Send private message Send e-mail Visit poster's website
Bill Groner


From:
QUAKERTOWN, PA
Post  Posted 7 Feb 2024 11:50 am    
Reply with quote

Not easy to see if the staniless has a really good polish on it. I have a stainless steel Shubb it that has a real good polish on it and looks pretty much like chrome. With use, the stainless will start to dull up.

If it is stainless it won't be very magnetic......some grades are a little more magnetic than others, but nothing like pure steel. Most chromed parts are double or triple plated. There is generally a layer of copper or brass plating that goes on first, then the chrome. If the core of the bar is steel the magnet will stick....if core is brass or copper it won't.

This will answer any questions I'm sure.
https://www.youtube.com/watch?v=rsxd4oovvBg

_________________
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
View user's profile Send private message Send e-mail
Bruce Bjork


From:
Southern Coast of Maine
Post  Posted 10 Feb 2024 1:59 pm    
Reply with quote

My local jeweler took care of mine, no charge, he was interested in what I used it for.
_________________
Banjo, Dobro, Guild D-40, Telecaster, Justice Pro Lite 3x5, BOSS Katana 100, Peavey Nashville 112 in a Tommy Huff cabinet, Spark, FreeLoader, Baby Bloomer, Peterson StroboPlus HD, Stage One VP.
"Use the talents you possess; the woods would be very silent indeed if no birds sang but the best"
View user's profile Send private message Send e-mail
Rich Arnold

 

From:
Tennessee, USA
Post  Posted 10 Feb 2024 6:41 pm    
Reply with quote

I make my own bars. On a lathe. I start with one inch round bar stock stainless. If one gets screwed up I toss it. I've never tried to fix one. The final polishing I do with news paper being ever so careful not to let it get hot.
I'd like to make you one, but it may take forever to find an open time slot to schedule it.
Better to just buy a new one comercial made.
I don't know if any commercially made bars are from solid stainless.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron