| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Advice needed national New Yorker new to lap steel
Reply to topic
Author Topic:  Advice needed national New Yorker new to lap steel
Tony Crocker

 

From:
Oklahoma, USA
Post  Posted 23 Jun 2017 5:52 pm    
Reply with quote



I am new to lap steel, or any guitar for that matter. I have purchased a 1 owner national New Yorker, late 30's. The guitar has been in a closet for a number of years and the widow is off to assisted living.

My initial thought is that it is probably time to replace the strings. The current ones seem to work as do all the settings and the 3 pickups. But the bass strings appear a bit rusty looking. All in all the guitar is in near mint condition

Any suggestions for strings or other items that I need to update? I plan to replace the caps when I replace the strings. By now the caps are probably leaky.

Thank you for any assistance.
View user's profile Send private message Send e-mail
Eric Dahlhoff


From:
Point Arena, California
Post  Posted 23 Jun 2017 8:18 pm    
Reply with quote

Change the strings. Don't bother opening it up. The caps are probably fine.
On 2nd thought, just sell it to me Very Happy
_________________
"To live outside the law you must be honest." (Bob Dylan)
View user's profile Send private message Send e-mail
Tony Crocker

 

From:
Oklahoma, USA
Post  Posted 24 Jun 2017 5:41 am    
Reply with quote

Measuring the current strings with a caliber I get .012 .014 .018 .032 .048 .058. This seems to correspond to A Major Low Bass tuning. Perhaps it should be restrung in C6 which I understand to be .015 .018 .022 .024 .030 .038
View user's profile Send private message Send e-mail
Bill Groner


From:
QUAKERTOWN, PA
Post  Posted 24 Jun 2017 7:15 am    
Reply with quote

I saw that one advertised for sale. It sure was pristine. Congrats. Very Happy
_________________
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
View user's profile Send private message Send e-mail
Former Member

 

Post  Posted 24 Jun 2017 7:59 am    
Reply with quote

Tony,
I would re-string it to C6th. Lots of EZ tabs out there. I guess it depends on what kind of music you want to play.
Also, didn't get very far until I got a teacher of some kind.
Lessons with Troy has excellent beginning C6th stuff.
View user's profile Send private message
James Kerr


From:
Scotland, UK
Post  Posted 24 Jun 2017 11:49 am    
Reply with quote

Unable to afford such things, I made my own copy about 7 years ago.

https://www.youtube.com/watch?v=Hu2KZAx6Co0

There is a quirky bit at the end.

James.
View user's profile Send private message Send e-mail
David M Brown


From:
California, USA
Post  Posted 24 Jun 2017 12:24 pm    
Reply with quote

If you tune to C6, you can also retune to several other tunings like A6, B11, E7, etc. The gauges are not optimal, but more versatile than the low bass tunings.

I like those old Nationals. My first steel was the Waikiki model, which is similar but really stripped down. They aren't Rick frypans, but they sound sweet.
View user's profile Send private message Send e-mail Visit poster's website
Tony Crocker

 

From:
Oklahoma, USA
Post  Posted 24 Jun 2017 12:56 pm    
Reply with quote

Ron and David
Thanks I was thinking C6 would be more useful. I definelly will be getting a teacher.

My playing thoughts are more in line with The Eagles or Pink Floyd rather than Swing or Hawaiian

James
I read your post. Well done

Bill
It is a mueseum pice. I am not a big person at 165 and 5' 8" but the previous owner must have been very small. The pics that it came with are small. I will need to order some me ones. I choose this one because I liked the Art Deco style and if I am a miserable failure I should be able to get my money back on the resale.
View user's profile Send private message Send e-mail
David M Brown


From:
California, USA
Post  Posted 25 Jun 2017 4:53 am    
Reply with quote

Tony Crocker wrote:

My playing thoughts are more in line with The Eagles or Pink Floyd rather than Swing or Hawaiian


Maybe you've seen this link:

https://www.google.com/webhp?source=search_app#q=david+gilmour+lap+steel

Red Jedson tunings
1977; Open G chord, D G D G B E
– Shine On You Crazy Diamond 6-9
1987 – 2006; Open Em chord, E B E G B E
– One of These Days and High Hopes

Blonde Jedson and Fender Deluxe tuning
1974 – 2006; Open G chord, D G D G B E
View user's profile Send private message Send e-mail Visit poster's website
Tony Crocker

 

From:
Oklahoma, USA
Post  Posted 25 Jun 2017 9:51 am    
Reply with quote

I watched the you tubes but had not read the guitar player article.

http://www.guitarplayer.com/news/1024/david-gilmour-talks-guitars-tone-and-tunings--gp-flashback/51145

Seems I need to learn a open E tuning as well. I see there are resources for learning this tuning.
View user's profile Send private message Send e-mail
James Kerr


From:
Scotland, UK
Post  Posted 25 Jun 2017 11:18 am    
Reply with quote

Tony,
Here is E7th with a Video.

https://www.youtube.com/watch?v=pWVll5SxZ7M

James.
View user's profile Send private message Send e-mail
Tony Crocker

 

From:
Oklahoma, USA
Post  Posted 25 Jun 2017 12:20 pm    
Reply with quote

Wonderful!! Thanks
View user's profile Send private message Send e-mail
Paul Honeycutt

 

From:
Colorado, USA
Post  Posted 25 Jun 2017 1:43 pm    
Reply with quote

My New Yorker is in open E. I play a lot of blues based music and jam-band kind of stuff on it. I can't remember the brand or gauges of strings off the top of my head. Coming from underarm guitar, E made sense to me.
View user's profile Send private message Send e-mail
Jerry Wagner


From:
California, USA
Post  Posted 25 Jun 2017 4:12 pm    
Reply with quote

Hi Tony,
You scored a museum quality '38 New Yorker. Mine isn't quite as well preserved. Sweet guitar, and in my mind ideal for Hawaiian, jazz, and old school blues. This guitar was really an advanced, professional quality instrument in 1938. It had multiple pickups way before anyone else thought about doing that. To open it up, you'd need an expert luthier to carefully cut the Bakelite fretboard at the 12th fret. Don't, unless you're really sure the electronics are not working properly. The tone control isn't a pot, it's a multi-pole selector switch that has contacts similar to an old automobile distributor.

Check out this short video on YouTube for the pickup switch orientations. Yours is probably set up just like this. At the end you can listen to the sound of each switch position played by Basil.

https://youtu.be/Az3ckmaMOE8

This is a unique lap steel; really nothing quite like it, certainly not in 1938. Wonderful, exotic, resonant tone.
View user's profile Send private message Send e-mail
Tony Crocker

 

From:
Oklahoma, USA
Post  Posted 25 Jun 2017 4:52 pm    
Reply with quote

Jerry
Cutting Bakelite is not something is wish to get into. I thought it was just removing the 6 screws. My thought was to upgrade to silver and oil caps or pcb and oil caps if they didn't fit.

The date you provided matches what I could dertermine from the serial number

Thanks for stopping me from a lot of frustration
View user's profile Send private message Send e-mail
Eric Dahlhoff


From:
Point Arena, California
Post  Posted 26 Jun 2017 8:24 am    
Reply with quote

Tony,
If you look carefully at the 12th fret you can see if it has a seam or if the fret-board is one piece.



_________________
"To live outside the law you must be honest." (Bob Dylan)
View user's profile Send private message Send e-mail
Tony Crocker

 

From:
Oklahoma, USA
Post  Posted 26 Jun 2017 4:29 pm    
Reply with quote



There does not appear to be a split

Side comment. This Thursday the 29th single showing only is Hired Gun. It is is a documentary with many rock legends about the Hired Gun musicians that play most of the music people love but don't know who played it.
View user's profile Send private message Send e-mail
Andy DePaule


From:
Saigon, Viet Nam & Springfield, Oregon
Post  Posted 27 Jun 2017 7:02 am    
Reply with quote

James Kerr wrote:
Unable to afford such things, I made my own copy about 7 years ago.

https://www.youtube.com/watch?v=Hu2KZAx6Co0

There is a quirky bit at the end.

James.


Nice job on that James.
I was thinking of building the same style.
Funny thing was I spent Sunday cruising youtube and came across your version of "There goes my everything" and it was real nice.
Thanks.... Very Happy
_________________
Inlaid Star Guitar 2006 by Mark Giles. SD-10 4+5 in E9th; http://luthiersupply.com/instrument-gallery.html
2017 Mullen SD-10, G2 5&5 Polished Aluminum covering. Custom Build for me. Great Steel.
Clinesmith Joaquin Murphy style Aluminum 8 String Lap Steel Short A6th.
Magnatone Jeweltone Series Lap Steel, Circa 1950? 6 String with F#minor7th Tuning.
1956 Dewey Kendrick D-8 4&3, Restoration Project.
1973 Sho~Bud Green SD-10 4&5 PSG, Restoration Project.
View user's profile Send private message Send e-mail Visit poster's website
Fred Kinbom


From:
Berlin, Germany, via Stockholm, Sweden.
Post  Posted 28 Jun 2017 8:59 am    
Reply with quote

Congratulations on this fine example of the 3-pickup New Yorker. That's my 1937 one Basil plays in the clip above (after he had kindly fixed it for me). I also play it at the start of this video:

https://www.youtube.com/watch?v=CV0KJE3lwE8

Very special instruments! Not for everything, but with a sound of their own.

Like others stated above, I would not open it if it works fine.

Enjoy it!

Fredrik
_________________
www.fredrikkinbom.com - New lap steel album out now - listen here: fredrikkinbom.bandcamp.com/album/songs-for-lap-steel-and-harmonium
View user's profile Send private message Send e-mail Visit poster's website
Tony Crocker

 

From:
Oklahoma, USA
Post  Posted 28 Jun 2017 3:25 pm    
Reply with quote

Fredrick
Thanks. What tuning do you use?

I plan not to open it
View user's profile Send private message Send e-mail
Fred Kinbom


From:
Berlin, Germany, via Stockholm, Sweden.
Post  Posted 29 Jun 2017 2:55 am    
Reply with quote

Hi Tony,

In that clip it is A-C#-E-A-C#-E (low to high) on the New Yorker. My main tuning however is G minor (D-G-D-G-Bb-D).

Fredrik
_________________
www.fredrikkinbom.com - New lap steel album out now - listen here: fredrikkinbom.bandcamp.com/album/songs-for-lap-steel-and-harmonium
View user's profile Send private message Send e-mail Visit poster's website
Tony Crocker

 

From:
Oklahoma, USA
Post  Posted 29 Jun 2017 6:28 pm    
Reply with quote

Great! Thanks
View user's profile Send private message Send e-mail
Graham Bingham

 

From:
United Kingdom
Post  Posted 29 Jan 2024 5:10 am    
Reply with quote

Hi, just jumped on this thread as I have just purchased a 1938 National New Yorker where the fretboard has moved in transit. I'm wondering the best way to put it back in the correct place!
Thanks!

View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron