| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Mystery Parts
Reply to topic
Author Topic:  Mystery Parts
Jon Light


From:
Saugerties, NY
Post  Posted 7 Jan 2024 5:25 am    
Reply with quote







Actually, the parts are bolts, washers and nylon locking nuts in the rear apron. No mystery at all about that.
And they are here because ....... Question Question




The mica was delaminating quite a bit in this area. I do NOT want to believe that this was someone's solution to that.
Because it took all of 3 minutes to get glue in there and clamp it up.

I'm at a loss as to why this clean Fessenden D-10 that just arrived on my bench for maintenance/setup/sale has this bit of hardware. It was not added by the current owner. I'm awaiting any possible further info from him.

I actually appreciate interesting solutions to individual needs -- "I needed to mount xxxxx to the rear apron". I do stuff like that.

But it's just not coming to me what that might have been.
Anybody have an imaginative suggestion?
View user's profile Send private message Send e-mail Visit poster's website
David Higginbotham

 

From:
Lake Charles, Louisiana, USA
Post  Posted 7 Jan 2024 8:03 am    
Reply with quote

I refurbished and re-mica’d a ‘70 S-10 fatback that had 3 holes drilled through the top deck near the keyhead to mount a microphone. Mind boggling to try and comprehend why some people do what they do. Laughing
View user's profile Send private message Send e-mail
Fred Jack

 

From:
Bastrop, Texas 78602
Post  Posted 8 Jan 2024 5:21 pm     Hole.
Reply with quote

True story. Leo Fender took Ralph Mooney a new Fender. Leo in turn took Moon's homemade steel to the factory to determine how he was getting "that tone". While Leo had his steel Moon decided he wanted another string on the new Fender. So instead of calling Leo he knew how to put a string on a steel. He drilled a hole right through the neck along side a keyhead. When Leo heard about that he went immediately and picked up his guitar. Needless to say Moon never played another Fender.
View user's profile Send private message Send e-mail
Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 8 Jan 2024 6:57 pm    
Reply with quote

David Higginbotham wrote:
I refurbished and re-mica’d a ‘70 S-10 fatback that had 3 holes drilled through the top deck near the keyhead to mount a microphone. Mind boggling to try and comprehend why some people do what they do. Laughing


Julian Tharp had this S20 MSA that he drilled the top and added a gooseneck mike stand:


View user's profile Send private message Send e-mail
Bobby D. Jones

 

From:
West Virginia, USA
Post  Posted 8 Jan 2024 10:10 pm    
Reply with quote

Since it looks to be centered between the left and right knee levers, On the back apron. No marks from something attached to the inside. Could a bracket have been placed on the outside of the back apron, To attach some sort of a Harmonica holder. So a player could play steel and have a harmonica in playing position.

Or a microphone bracket, To sing or play Harmonica through.

Run out of Glue, Just drill and bolt the Formica back to the apron.
View user's profile Send private message Send e-mail
Ian Rae


From:
Redditch, England
Post  Posted 9 Jan 2024 1:14 am    
Reply with quote

On a previous instrument I used to have a bracket to mount a stomp box. Screws preferable to holes?
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron