Author |
Topic: 710 Bill Lawrence pick up wiring diagram |
Stevan Sparks
From: Oregon, USA
|
Posted 7 Jan 2024 1:47 pm
|
|
Can someone guide me thru wiring up 710 pick ups on a Mullen’s Royal precision D10. I’ve taking off BL 705 that have 4 wires and the new pick ups have 3 wires, red, white, and black. It has a toggle switch that switches from the C6 to E9.that just has 3 wires connected to it. When in the center position both necks are working. I wired it up the way I thought may work matching same colors that came off the 705 but it seems real tinty and the sustain and bottom end don’t seam like it’s full as it should be. |
|
|
|
Quentin Hickey
From: Nova Scotia, Canada
|
|
|
|
memphislim
From: Austin, Texas
|
Posted 9 Jan 2024 10:13 am
|
|
According to Becky at BL, the red wire is for a single/split coil setup. Use only the White wire if you want full humbucking using both coils. |
|
|
|
Richard Sinkler
From: aka: Rusty Strings -- Missoula, Montana
|
Posted 9 Jan 2024 12:30 pm
|
|
memphislim wrote: |
According to Becky at BL, the red wire is for a single/split coil setup. Use only the White wire if you want full humbucking using both coils. |
Exactly. If you want to split the coils to give the option of single coil or a humbucker, You wire the red wire to one side of a SPST switch, and run a wire from the other side to ground. _________________ Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Quentin Hickey
From: Nova Scotia, Canada
|
|
|
|