| Author |
Topic: Zum cross rod nylon washer size? |
FRANK MARIANO
From:
PENSACOLA FL
|
Posted 26 Dec 2023 2:18 pm |
|
I’m needing a few nylon cross rod washers for my Zum , my vertical knee has to much slack. Can someone give me heads up where to get them. I need to know what size they are as well I looked up nylon washers on google and can get them on line. SIZE PLEASE
_________________
Zum,Mullen,Sterio Steel,Little Walter, Fox Vintage,Beard,Fender Lap |
|
|
 |
Danny Letz
From:
Old Glory,Texas, USA 79540
|
Posted 27 Dec 2023 9:03 am
|
|
The one I am measuring came from Bruce and realize that it is split and measurement may not be exact, but it'll be dang close. ID 0.37,OD 0.63, 0.03 thick as measured with a Harbor Freight digital caliper.  Also some of them are wavy but measure the same. |
|
|
|
Pete Burak
From:
Portland, OR USA
|
Posted 27 Dec 2023 10:04 am
|
|
They have a drawer at our local Ace Hardware called "Nylon Spacers". That might be a good local source for a part that will work. I usually match the size to one of the other ones on the Steel when I go on the hunt for a needed part.
Can you post a pic? |
|
|
|
FRANK MARIANO
From:
PENSACOLA FL
|
Posted 28 Dec 2023 5:45 am Nylon washers
|
|
Thanks Danny, and Pete
_________________
Zum,Mullen,Sterio Steel,Little Walter, Fox Vintage,Beard,Fender Lap |
|
|
|
FRANK MARIANO
From:
PENSACOLA FL
|
Posted 31 Dec 2023 11:20 am
|
|
Danny when you say it’s split do you mean thats the way Bruce installed it or is it split by accident?
_________________
Zum,Mullen,Sterio Steel,Little Walter, Fox Vintage,Beard,Fender Lap |
|
|
|
Danny Letz
From:
Old Glory,Texas, USA 79540
|
Posted 31 Dec 2023 1:39 pm
|
|
| I don't know if Bruce bought them split or split them himself. The split is there so you can slip them over the cross shaft without removing it. The nylon washers I'm talking about just remove endplay from the cross shaft. You can split them yourself. I would just use a set of side cutter pliers probably. Some of the washers I have are wavy, some are not. |
|
|
|
Danny Letz
From:
Old Glory,Texas, USA 79540
|
Posted 31 Dec 2023 1:43 pm
|
|
| I sent you a pm. |
|
|
|
Bruce Zumsteg
From:
Harrisonville, Missouri, USA
|
Posted 2 Jan 2024 3:48 pm
|
|
| Frank, PM sent |
|
|
|
