Author |
Topic: CNC Files, drawings, CAD, PDF - POST HERE |
J D Sauser
From: Wellington, Florida
|
Posted 23 Mar 2023 2:41 pm
|
|
I just heard the call for a sticky thread for drawings relative to steel guitars.
So here it is.
Thanks for the idea!… JD _________________ __________________________________________________________
Was it JFK who said: Ask Not What TAB Can Do For You - Rather Ask Yourself "What Would B.B. King Do?"
A Little Mental Health Warning:
Tablature KILLS SKILLS.
The uses of Tablature is addictive and has been linked to reduced musical fertility.
Those who produce Tablature did never use it.
I say it humorously, but I mean it. |
|
|
|
Les Ford
From: British Columbia, Canada
|
Posted 27 Mar 2023 6:44 am
|
|
I'm not too clear on how to upload anything but bitmap images. I tried to upload a DXF but the file type is not supported. |
|
|
|
J D Sauser
From: Wellington, Florida
|
Posted 27 Mar 2023 7:44 am
|
|
Les Ford wrote: |
I'm not too clear on how to upload anything but bitmap images. I tried to upload a DXF but the file type is not supported. |
I think the correct “protocol” is to upload documents onto a sharable folder like DropBOX etc. and post the public link only on the Forum.
Thanks!… JD _________________ __________________________________________________________
Was it JFK who said: Ask Not What TAB Can Do For You - Rather Ask Yourself "What Would B.B. King Do?"
A Little Mental Health Warning:
Tablature KILLS SKILLS.
The uses of Tablature is addictive and has been linked to reduced musical fertility.
Those who produce Tablature did never use it.
I say it humorously, but I mean it. |
|
|
|
Les Ford
From: British Columbia, Canada
|
Posted 31 Mar 2023 4:51 pm
|
|
Thanks JD |
|
|
|
Dennis Brooker
From: Iowa, USA
|
Posted 6 Jun 2023 7:33 pm If anyone needs help with file creation for print or CNC
|
|
Before I retired part of my business was consulting and training employees to use mainly vector graphics arts programs and I specialized in creating files for 2D CNC applications - Many years ago I used to print fretboards on real wood veneers but no longer offer that service but still have more than a few fretboard files on hand - If you do need some help for whatever just PM me and I'll see if I can help - Just trying to contribute. |
|
|
|
Jerry Dragon
From: Gate City Va.
|
Posted 23 Dec 2023 4:09 am
|
|
I was a CNC programmer for years. I would use a digitizer at times, trace out what I wanted, go around with the digitizer and pick points then connect the dots and program it. If it wasn't quite right I could massage the code on screen or go back to the drawing board. I forget which software program it was, maybe datacut, that is going way back. I am used to using expensive software packages or just writing the G code for simpler parts. I have made bell cranks, pick up covers, foot pedals etc. but now I am retired. I had gents send me parts and I would copy them and draw them up in MasterCam and make them. DXF files wern't very large, I would download them quite often. I know those HAAS machines inside out. _________________ A FATE WORSE THAN LIFE |
|
|
|