| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic EQ pedal recommendations
Reply to topic
Author Topic:  EQ pedal recommendations
Gary Jarvis

 

From:
Indiana, USA
Post  Posted 20 Nov 2023 7:44 am    
Reply with quote

I am trying to find a more desirable tone from my D10 Carter through a Peavey Session 400 Limited. Any suggestions for an EQ pedal?
Thank you
Gary
View user's profile Send private message Send e-mail
Dave Campbell


From:
Nova Scotia, Canada
Post  Posted 20 Nov 2023 8:20 am    
Reply with quote

many eq pedals add a lot of noise, which is not ideal. most eq units are graphic eqs, which may or may not have the right frequencies chosen for steel. you need a high quality parametric eq. i’ve tried a few, and went with the empress park eq. it really does a great job cutting the mids in just the right place and just the right amount. i also use it for a bit of bass boost and to control the harshness of the treble. as a bonus, it has a great boost function as well.
View user's profile Send private message Send e-mail
Slim Heilpern


From:
Aptos California, USA
Post  Posted 20 Nov 2023 8:30 am    
Reply with quote

I agree completely with what Dave said. I also use the Empress ParaEQ.

- Slim
_________________
Chromatic Harmonica, Guitar, and Pedal Steel (Williams U12 Series 700, Emmons lap)
http://slimandpenny.com
View user's profile Send private message Send e-mail Visit poster's website
Justin Shaw

 

From:
Ontario, Canada
Post  Posted 20 Nov 2023 9:39 am    
Reply with quote

I do not currently have an EQ pedal, but I did look into these a few months ago, and found that Empress was definitely top of the heap for the pedal format. I am gratified to see others recommending it.

Link:
https://empresseffects.com/products/paraeq-mkii-deluxe
View user's profile Send private message Send e-mail
Greg Duncan

 

From:
Florida, USA
Post  Posted 20 Nov 2023 9:40 am     Eq
Reply with quote

DONT EQ
enhance the eq tone you
You have .
BBe sonic maximizer
It's going enhance highs and lows lows
Give a wider spectrum of
Sound and tone
I have 4 of these in my rack
They a pedal version ...
Any more info pm me
View user's profile Send private message Send e-mail
Dave Grafe


From:
Hudson River Valley NY
Post  Posted 21 Nov 2023 2:41 am    
Reply with quote

The Session 400 is one of the best sounding steel amps ever made and its tone controls are quite comprehensive. I suggest you practice with your amp turned off until your fingers learn pull tone from the strings alone. If you don't do that first you'll never get it from a box.
View user's profile Send private message Send e-mail Visit poster's website
Dave Campbell


From:
Nova Scotia, Canada
Post  Posted 21 Nov 2023 6:35 am    
Reply with quote

i kind of agree with what dave said above. i use my eq when i play with a fender twin, because its stock mid range control is not ideal for pedal steel. when a use my session 400 i find i don’t bother turning the eq pedal on. the session 400 has a sweepable mid control as well as treble and presence. it is voiced very well for pedal steel.
View user's profile Send private message Send e-mail
Dave Grafe


From:
Hudson River Valley NY
Post  Posted 21 Nov 2023 6:47 am    
Reply with quote

I will only add that ALL eq filters generate phase distortion, and especially so for inexpensive multi-band stomp-box circuits. If you look at your signal on a scope the fine clear trace becomes wobbly and blurry when even the very best eq is applied, thus adding more eq to a signal will always reduce the clarity and integrity of tone produced, which is why professionals use the least eq possible and then only to cut undesirable frequencies, as boosting the desired ones increases audible phase distortion in that part of the spectrum.
View user's profile Send private message Send e-mail Visit poster's website
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 21 Nov 2023 7:42 am    
Reply with quote

Dave Grafe wrote:
The Session 400 is one of the best sounding steel amps ever made...

Wholeheartedly agree!

But the Session 400 Limited? Not so much...
View user's profile Send private message Send e-mail
Dave Grafe


From:
Hudson River Valley NY
Post  Posted 21 Nov 2023 8:19 am    
Reply with quote

Jack Hanson wrote:
Dave Grafe wrote:
The Session 400 is one of the best sounding steel amps ever made...

Wholeheartedly agree!

But the Session 400 Limited? Not so much...


Ah, yes, the old Session 400/LTD/Limited confusion. The 400 "Limited" is no doubt the most limited of the three, but even with the progression from discrete components to op-amps the eq filters themselves remain essentially the same, retaining the well-voiced lows and highs and sweepable mids of the original. If there's a problem with the tone coming out if the amp additional eq is not going to solve it.
View user's profile Send private message Send e-mail Visit poster's website
Ken Metcalf


From:
San Antonio Texas USA
Post  Posted 21 Nov 2023 11:39 am    
Reply with quote

Peavey Session 400 Limited is a mediocre amp at best.
Test some other amps.
_________________
MSA 12 String E9th/B6th Universal.
Little Walter PF-89.
Bunch of stomp boxes
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron