| Author |
Topic: Looking for dimensioned drawings of an all pull changer |
Paul Mageau
From:
Maine, USA
|
Posted 27 Aug 2024 9:27 am |
|
Does anyone have a dimensioned drawing of changer fingers they can share ? I want to dabble in making my own PSG and would like to start with a known design if possible.
Thanks! |
|
|
 |
Mike Preuss
From:
Mount Vernon, Washington, USA
|
Posted 27 Aug 2024 10:01 am Changer Finger drawing
|
|
I have to-scale PDFs of changer fingers. I have had good results printing the templates, cutting them out and gluing them to the metal to be cut and drilled. Send me a PM to get a hold of the files. |
|
|
|
Paul Mageau
From:
Maine, USA
|
Posted 28 Aug 2024 4:16 am
|
|
Mike,
I am hoping To create 3-D cad files from whatever drawings I get. Are your PDF files dimensioned or they just templates that’s one to cut out manually on sheet metal or whatever material you’re going to use? |
|
|
|
Mike Preuss
From:
Mount Vernon, Washington, USA
|
Posted 28 Aug 2024 7:42 am
|
|
| They are simple 2-D drawings of parts. I build with basic tools - table saw, band saw, drill press, miter saw and hand tools. Guess I didn't know what dimensioned drawings meant. Good luck with your search. |
|
|
|
Rich Cottle
From:
Sacramento California
|
Posted 28 Aug 2024 3:55 pm Nothin
|
|
Oops
Last edited by Rich Cottle on 28 Aug 2024 6:48 pm; edited 1 time in total |
|
|
|
Paul Mageau
From:
Maine, USA
|
Posted 28 Aug 2024 4:05 pm
|
|
I have a large cnc, two 3d printers and a 60W Co2 laser cutter along with a fully equipped wood shop. I am going to experiment with different engineering grade plastics as well as aluminum. My first changer will be these plastics. Once I have a design I like, I will mill the pieces myself or use my designs to outsource the fabrication in metals, possibly ones I can’t machine like stainless steel.
I did find this drawing today. I am postimg it here to share with others.
 |
|
|
|
Paul Mageau
From:
Maine, USA
|
Posted 28 Aug 2024 4:09 pm
|
|
I have a large cnc, two 3d printers and a 60W Co2 laser cutter along with a fully equipped wood shop. I am going to experiment with different engineering grade plastics as well as aluminum. My first changer will be these plastics. Once I have a design I like, I will mill the pieces myself or use my designs to outsource the fabrication in metals, possibly ones I can’t machine like stainless steel.
I did find this drawing today. I am postimg it here to share with others.
|
|
|
|
