| Author |
Topic: How difficult would it be to add two knees to a GFI student |
Bruce Johnson
From:
Shenandoah Valley of Virginia, USA
|
Posted 12 Oct 2023 5:03 pm |
|
| How difficult would it be to add two knees to a GFI student model with 2 knee levers? |
|
|
 |
Bobby D. Jones
From:
West Virginia, USA
|
Posted 12 Oct 2023 7:16 pm
|
|
Just call or e-mail GFI on their website. They could tell you if it is possible to install 2 more levers, And parts required for installation.
If it is the same type knee lever that is on the Ultra, They can be made into Left, Right or vertical with stop screws on both sides of the lever, Very easy to adjust.
Good Luck on this project, Happy Steelin. |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 12 Oct 2023 7:47 pm
|
|
| I just got off the GFI web site, They list knee lever kits for the 10 SM model steel. Left or Right. 225.00 per knee lever kit. |
|
|
|
Jon Light
From:
Saugerties, NY
|
Posted 13 Oct 2023 2:58 am Re: How difficult would it be to add two knees to a...
|
|
| Bruce Johnson wrote: |
| How difficult would it be to add two knees to a GFI student model with 2 knee levers? |
Only you can answer that. If you look at the underside of your student model pull-release guitar and you are confident that you understand how it works and how and when these springs are required, then I expect that it should not be very difficult. Pull-release is not rocket science but it does have an extra layer of complexity vs. all-pull.
 |
|
|
|
Bruce Johnson
From:
Shenandoah Valley of Virginia, USA
|
Posted 13 Oct 2023 7:18 pm Thanks!
|
|
| Thanks so much, you guys! I'm going to give it a try and will let you know. |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 14 Oct 2023 9:31 am
|
|
| Bobby D. Jones wrote: |
| I just got off the GFI web site, They list knee lever kits for the 10 SM model steel. Left or Right. 225.00 per knee lever kit. |
Ridiculous price, really, for what you get.
(Just an observation, y'understand.  ) |
|
|
|
