| Author |
Topic: Emmons D-10 extended front legs. |
Clay King
From:
Salem, Oregon, USA
|
Posted 3 Oct 2023 1:03 pm |
|
I have the pedal rods with the extended hex nuts and the back legs but I’m trying to find two 27” front legs for an Emmons D-10 PP. I only need the front two but would also consider purchasing all four if somebody had them for the one inch raise.
Thanks,
Clay
_________________
"The Blues Is Your Word Man" |
|
|
 |
Charlie Powell
From:
Kingsport, Tennessee, USA
|
Posted 3 Oct 2023 2:59 pm
|
|
I just use standard legs and get some 5/8" shaft collars. Put one at the bottom of the clutch if you worry about slippage, put one where it will hold the top of the pedal bar. This is not my picture, and the collars I use have the set screw in a little different but you get the idea.
_________________
Charlie Powell |
|
|
|
Clay King
From:
Salem, Oregon, USA
|
Posted 3 Oct 2023 3:22 pm Extended legs
|
|
Thanks Charlie, yes I will use spacers, but was hoping to find some legs, thanks for the picture and info.
Clay
_________________
"The Blues Is Your Word Man" |
|
|
|
