| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Bench-top Mini Miling Machine Suggestions
Reply to topic
Author Topic:  Bench-top Mini Miling Machine Suggestions
Ivan Funk

 

From:
Hamburg Pennsylvania, USA
Post  Posted 5 Aug 2023 9:06 pm    
Reply with quote

I had to downsize and no longer have a shop space.
I'm thinking of getting a bench-top mini milling machine. I'm looking at something like the Grizzly G0781 or cheaper Amazon equivalents.
Looking for recommendations or suggestions.
What do you have or like? What ones to avoid etc...
View user's profile Send private message Send e-mail
David Ball


From:
North Carolina High Country
Post  Posted 6 Aug 2023 2:49 am    
Reply with quote

I have the Little Machine Shop Hi Torque mini mill, and I have converted it for CNC. I also have a manual Harbor Freight mini mill. I really prefer the LMS mill since it doesn't have the tilting column and does have a bigger table.

The tilting column seemed like a good idea, but I've had problems with the HF mill getting out of tram due to the column tilt slipping just a little bit if put under a heavier load. I generally use that mill as a drill press these days--it's a really good drill press!
View user's profile Send private message Send e-mail
Ivan Funk

 

From:
Hamburg Pennsylvania, USA
Post  Posted 6 Aug 2023 3:37 am    
Reply with quote

Thanks David.
Helpful info.
That Hi Torque Mini Mill looks nice.
View user's profile Send private message Send e-mail
Ross Shafer


From:
Petaluma, California
Post  Posted 6 Aug 2023 7:58 am    
Reply with quote

I've been a machine tool nut all my adult life....forget those modern mini machines and sit tight for a Rockwell 21-100, 21-122 or a Clausing 8520. These are increasingly hard to find and can be spendy.

These are real machine tools that will outlast you if taken care of.

The Rockwells are the larger of the two brands, both come on their own stands so they're not technically "Benchtop" but they're much smaller than Bridgeport type mills and are the go too small mills for those in the know.

I prefer the Rockwells because they use a standard available everywhere R8 collet in the spindle. The Clausing uses a different collet size that is not as common, though still obtainable.

I just happen to have a Rockwell 21-100 for sale, but shipping from California to PA would make it more spendy that it needs to be. plenty of these machines there on the East Coast. Keep an eye out on your local Craigslist, Ebay and Practical Machinist Forum 9you can place a wanted to buy ad here.
View user's profile Send private message Send e-mail
Ivan Funk

 

From:
Hamburg Pennsylvania, USA
Post  Posted 6 Aug 2023 4:38 pm    
Reply with quote

Thanks Ross.
This is gathering some good info.
I did notice there are cheap used Bridgeports and other mid sized milling machines all over Craigslist. I could get a used real mill for the price of a new mini mill.
My limitation right now is I am in a small apartment so I want to get something to tinker with until I get a shop space again. I'm even considering a micro-mill. Then maybe upgrade to something bigger.
The Rockwell looks great.
View user's profile Send private message Send e-mail
Ivan Funk

 

From:
Hamburg Pennsylvania, USA
Post  Posted 6 Aug 2023 4:43 pm    
Reply with quote

Ross - is this older model any good?
Seems like a good price?
I wish I had the space for it.
Maybe I could put it in the kitchen lol.
https://philadelphia.craigslist.org/tls/d/unionville-rockwell-milling-machine/7643358152.html
View user's profile Send private message Send e-mail
Ross Shafer


From:
Petaluma, California
Post  Posted 6 Aug 2023 6:02 pm    
Reply with quote

that's the boss right there, these aren't made anymore, so they're all old.

If the table moves smooth, is in decent condition and the spindle runs smoothly and true, that is a killer price!
View user's profile Send private message Send e-mail
Ivan Funk

 

From:
Hamburg Pennsylvania, USA
Post  Posted 6 Aug 2023 6:16 pm    
Reply with quote

Thanks Ross!
I thought the price seemed good.
Tempting. Maybe I'll go look at it...
View user's profile Send private message Send e-mail
Ivan Funk

 

From:
Hamburg Pennsylvania, USA
Post  Posted 9 Aug 2023 7:36 pm    
Reply with quote

To have something to use until I decide on a bigger machine I picked up a Unimat SL1000 that was for sale close by. The guy gave me a good deal on it. It's tiny but it works surprisingly well as a lathe and milling machine. Fun.
View user's profile Send private message Send e-mail
Terry Anderson

 

From:
Oaklahoma, USA
Post  Posted 13 Sep 2023 5:27 pm     Seat
Reply with quote

Who makes steel seats
View user's profile Send private message Send e-mail
Marvin Born

 

From:
Ohio, USA
Post  Posted 25 Sep 2023 3:58 pm     Table top mills
Reply with quote

Check out Sherline table top mills and lathes. US built and either manual or CNC available. The 5000 series work well. The 2000s work well but are more difficult to set up. Hundreds of accessories are available. I suggest the longer lathe. These are great for making pedal steel parts.
View user's profile Send private message Send e-mail
J D Sauser


From:
Wellington, Florida
Post  Posted 28 Sep 2023 12:16 pm    
Reply with quote

I am toying about getting one too.
I was trained in Switzerland in the 80's... so I am "metric". The choice of machines in the US... most cheap options from China, is difficult for me to mentally deal with. What I do see is that some of the table top "cheap" ones may have a "different" spindle and not work with common tool chucks sizes? So, look out for that.

And the I'm looking at 3D printers but I have such a hatred for all digital that is getting just stronger and stronger and has cost me some screens already.

... J-D
_________________
__________________________________________________________

Was it JFK who said: Ask Not What TAB Can Do For You - Rather Ask Yourself "What Would B.B. King Do?"

A Little Mental Health Warning:

Tablature KILLS SKILLS.
The uses of Tablature is addictive and has been linked to reduced musical fertility.
Those who produce Tablature did never use it.

I say it humorously, but I mean it.
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron