| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Austin TX, Trouble with undercarriage rod
Reply to topic
Author Topic:  Austin TX, Trouble with undercarriage rod
Evan Hall

 

From:
Texas, USA
Post  Posted 20 Jul 2023 3:42 pm    
Reply with quote

Hi all,

Wanted to get some feedback here. I'm fairly new to steel guitar and troubleshooting in general. I added my location just in case any locals would be willing to help out. The rod hooked to my C lever raising string 4 will not hold in place. If seems tight to the crank until I engage the pedal, and then will not return to its original position with the crank. The guitar is a Fessenden D-10 that was converted. Any help is greatly appreciated!

View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 21 Jul 2023 4:12 am    
Reply with quote

Sounds like it could be overtuned. Back off the nylon tuners so you are sure they don't touch the changer finger at rest. Tune your open note at the keyhead, then tune your raise on the string, to F# on the C pedal, F on the F lever (there is no C lever), then the lower to D# on a knee lever.

Read this post carefully:
https://bb.steelguitarforum.com/viewtopic.php?t=326460
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Bob Hoffnar


From:
Austin, Tx
Post  Posted 22 Jul 2023 7:56 am    
Reply with quote

If it’s not overtuned check to see if the crossbar is stiff. This is a common issue with Fessenden’s. They are easy to loosen though. There should some wiggle in the crossbar after you make sure it’s not overtuned.
_________________
Bob
View user's profile Send private message Send e-mail Visit poster's website
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 22 Jul 2023 3:21 pm    
Reply with quote

Bob Hoffnar wrote:
If it’s not overtuned check to see if the crossbar is stiff. This is a common issue with Fessenden’s. They are easy to loosen though. There should some wiggle in the crossbar after you make sure it’s not overtuned.


True. I worked on 2 Fessys and found this problem on one of them. I forgot about it.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron