| Author |
Topic: Evans FET 500 LV Speaker Impedence |
Lee Rider
From:
Fort Bragg, California, USA
|
Posted 9 Aug 2023 8:57 pm |
|
I have a 1982 Evans FET 500 LV, serial number 009, that does not have the original cabinet and no indication of speaker impedence or wattage. Seems like quiet a few Forumites are well versed in the Evans amps. Want to make sure the speaker the right one.
Any info greatly apprecaited!
Thanks
Lee Rider
_________________
Bowman SD10 push pull 3x5, Modified Hudson PedalBro, Sarno Tonic preamp, Evans FET 500. with Altec 418B, Standel Custom 15, '67 Showman with D-130F in cabinet, Ganz Straight Ahead, custom Wolfe 6 string dobro, '52 Gibson Century 6. |
|
|
 |
David Higginbotham
From:
Lake Charles, Louisiana, USA
|
Posted 10 Aug 2023 6:42 am
|
|
| You can run a 4 or 8 ohm speaker in the amp. 4 ohm will give you 200 watts. If you’re running an extension cabinet both need to be 8 ohms for a 4 ohm load. One of the best steel amps ever built! |
|
|
|
Lee Rider
From:
Fort Bragg, California, USA
|
Posted 10 Aug 2023 8:49 am
|
|
Thanks David!
Best,
Lee Rider
_________________
Bowman SD10 push pull 3x5, Modified Hudson PedalBro, Sarno Tonic preamp, Evans FET 500. with Altec 418B, Standel Custom 15, '67 Showman with D-130F in cabinet, Ganz Straight Ahead, custom Wolfe 6 string dobro, '52 Gibson Century 6. |
|
|
|
