| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Lap Steel & Pedal Steel Differences
Reply to topic
Author Topic:  Lap Steel & Pedal Steel Differences
Casey Saulpaugh


From:
Winston-Salem, NC
Post  Posted 22 Jun 2023 11:43 am    
Reply with quote

Here’s an article that discusses the main differences between lap steel and pedal steel:
https://playpedalsteel.com/pedal-steel-vs-lap-steel/

Anyone start with lap steel, and then start playing pedal steel later? Curious to see if that helped you in the long run for playing both instruments?

Seems to me that keeping things simpler in the beginning of the learning process by playing lap steel (focusing on blocking, bar control, technique fundamentals) could make jumping into pedal steel easier…as well as going back to lap steel whenever. Also seems like a lot of the older generations of players had a greater knack for bar control and technique in general by starting with lap steel (Buddy Emmons for example).

Thoughts?
_________________
https://playpedalsteel.com - An online resource for steel guitar. Download a FREE Pedal Steel Practice Book!
View user's profile Send private message Send e-mail Visit poster's website
Bill McCloskey

 

Post  Posted 22 Jun 2023 11:57 am    
Reply with quote

I played Dobro, lapsteel and for the last number of years a 12 string version of the Alkire eharp tuning. This specific tuning was very helpful in transitioning to pedal steel because everything is laid out the same and the AB pedal changes are available on single fret. And since I learned with 4 finger picks, this helped when moving to pedals.
View user's profile Send private message
Jim Pitman

 

From:
Waterbury Ctr. VT 05677 USA
Post  Posted 23 Jun 2023 4:12 pm    
Reply with quote

Certainly. My history is dobro/lap steel/pedal steel.
To me it's all in the right hand. I developed a hybrid pick and palm blocking as a result.
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 24 Jun 2023 7:21 am    
Reply with quote

I started on an acoustic Oahu lap guitar, went to an electric Gibson lap guitar, went to a triple neck Fender Stringmaster and then graduated to a Sho~Bud pedal steel.
The only reason I went to a pedal steel was the ability to get full three string chord grips up and down the neck. Very Happy
Erv
View user's profile Send private message Send e-mail
Bill McCloskey

 

Post  Posted 24 Jun 2023 10:34 am    
Reply with quote

You could have learned the alkire tuning Erv and you would have had full four string chord voicings. Smile
View user's profile Send private message
Jim Fogarty


From:
Phila, Pa, USA
Post  Posted 24 Jun 2023 2:14 pm    
Reply with quote

Differences, in visual form.....


View user's profile Send private message Send e-mail Visit poster's website
Dave Mudgett


From:
Central Pennsylvania and Gallatin, Tennessee
Post  Posted 25 Jun 2023 12:05 am    
Reply with quote

I started playing slide guitar 30 years before I started playing steel. As far as steel goes, I started playing pedal steel first because that's the sound I wanted - pedal steel, no ifs, ands, or buts. But as I got into it more, I found that, sometimes, I wanted to play without pedals.

I personally think it is totally reasonable for players to just start on the instrument that moves them at the time. Whatever that is. I think passion is the essential ingredient to learning any of them.

Ha, Jim! I never exactly thought about pedal steel as bombshell sexy, but maybe you're right. Laughing
View user's profile Send private message Send e-mail
Jeff Mead


From:
London, England
Post  Posted 26 Jun 2023 5:22 am    
Reply with quote

I started on pedal steel but quickly felt I was way out of my depth. I also realised i had the wrong instrument for what I acrually wanted to play - Hank Snr. style country and western swing so I bought a lap steel (six stringer, and eentually a triple 8 neck). I started to get interested in more modern country and the pedal steel sound (I had started experimenting on guitar with a b-bender) and when I eventually bought another pedal steel, it all made more sense to me. I already knew what to do with my hands and so it was far easier to then figure out the pedals.

Luckily, I had accidentally settled on A6 as my main tuning which meant that with A&B pedals down and a lever lowereing my low D to a C# I had my A6 "safety net" (a 6 string A6 on strings 4-9). Whenever I got lost, I could revert to what I already knew on A6 until I could get my bearings again! Helped a lot with live gigs (still does!!!).
View user's profile Send private message Send e-mail
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 26 Jun 2023 6:07 am    
Reply with quote

Count me in as another guy who got his start on pedal steel. I did not purchase a lap steel guitar until I had almost a decade under my belt playing a pedal guitar. Nowadaze, I play lap steels almost exclusively.
View user's profile Send private message Send e-mail
Bill McCloskey

 

Post  Posted 26 Jun 2023 11:28 am    
Reply with quote

When I first started non-acoustic I bought an MSA 12 string universal Millennium and the very first 12 string Superslide from Reece. I fell in love with the lap steel and sold the pedal. Now I wish I had kept it
View user's profile Send private message
Samuel Phillippe


From:
Douglas Michigan, USA
Post  Posted 26 Jun 2023 2:09 pm    
Reply with quote

I started on bottle slide when another bottle slide player came in but used a open E tuning, I thought why not and went and bought a resonator. Played like that until I spotted a nut riser, so put in on and graduated to dobro style.
Quite a few years later a local guitar shop had a lap steel for sale for $90 so I bought it. Graduated to 8 string lap, with legs until another guitar player said to get a pedal steel because they were easy to play.....yea, right,......found out he never played a lap or pedal steel but he watched a pedal player and noted he didn't have to move the bar.
So here I am padaling the strings and enjoying it. I don't gig with it but sometimes think I should come out of retirement and do it......it's easy...???>>>..>..

By the way Jim, which one of those is your sister?

Sam
View user's profile Send private message Send e-mail
Paul Seager


From:
Augsburg, Germany
Post  Posted 26 Jun 2023 10:35 pm    
Reply with quote

My own musical history began on electric bass. I had long been fascinated by PSG but the price of the instrument put me off. I began playing 6 string lap steel much later in life, "upgraded" to 8 string and then a D8. Now I have an entry level PSG from the German builder WBS.

I thought that years of playing A6 would help me out in the "pedals down" position but this hasn't really been the case. I have dispensed with the books I initially purchased and bought Paul Frankin's Introduction course. This is "back to basics" but worth it. Paul makes many references to his early lap steel lessons and their value but my own struggle is using the pedals and the volume pedal together, rethinking simple 1-4-5 sequences. This requires intensive practice.

Sure, everything learnt on lap steel is helping reduce the learning curve but ...
    Still trying to get the ergonomics right, sitting "inside" the instrument, finding the right shoes (cowboy boots are thankfully not essential!) I suspect this'll change many times in the future.

    Depending on how one picks and blocks on lap steel, it isn't that different on PSG: As Franklin's course states, Pick Blocking is not the only method!

    Adapting left hand technique, holding the longer and heavier bar straight rather than tilting or slanting. Btw, Franklin encourages practicing with a "Stevens" bar to develop a good grip!

    Playing with the amp far louder than normal to learn how to control volume swells. Oh boy, that annoys the wife!

But IMO, one should approach PSG as a related but different instrument to lap. It requires different thinking and physical skills to make it sing. I am 61 years young and can join a just-for-fun jazz session on non-PSG. I doubt to ever become that proficient in PSG but I am certainly enjoying the learning curve.
_________________
\paul


Bayern Hawaiians: https://www.youtube.com/@diebayernhawaiians3062
Other stuff: https://www.youtube.com/@paulseager3796/videos
View user's profile Send private message Send e-mail
Rich Arnold

 

From:
Tennessee, USA
Post  Posted 4 Jul 2023 11:13 am    
Reply with quote

A pedal steel is a lap steel until you press down on a pedal or knee lever.
View user's profile Send private message Send e-mail
Nic Neufeld


From:
Kansas City, Missouri
Post  Posted 4 Jul 2023 12:55 pm    
Reply with quote

Jim Fogarty wrote:
Differences, in visual form.....


(backs away from making joke about lower back problems later in life, carting the extra weight of the pedal steel around)

I'm atypical in that I started with lapsteel but jumped over...mostly briefly...to pedal steel, but still in predominantly lap steel styles (Hawaiian), tinkering with Basil Henriques copedent and trying out some similar copedents to what I imagine the Hawaiian pedal players of the 50s/60s were doing. But mine's cased up right now, I didn't have room for it and I wasn't making significant progress with it. But maybe someday I'll get back to it! My trouble with pedal steel is it is hard enough to learn all the intervals between strings of a single tuning...then you add the ability to change the tuning into so many different possible tunings on the fly with your feet! Tricky stuff.
_________________
Waikīkī, at night when the shadows are falling
I hear the rolling surf calling
Calling and calling to me
View user's profile Send private message Send e-mail
Brooks Montgomery


From:
Idaho, USA
Post  Posted 4 Jul 2023 1:41 pm    
Reply with quote

The difference to me is like one of those photos of a hallway of mirrors.
Lapsteel is like a mirror.
Pedal steel with feet and knees is like a mirror within a mirror within a mirror……


_________________
A banjo, like a pet monkey, seems like a good idea at first.
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 5 Jul 2023 6:40 am    
Reply with quote

I still play a lot of Hawaiian music on a pedal steel.
I like the ability to have several chord positions up and down the fretboard. Very Happy
Erv
View user's profile Send private message Send e-mail
Casey Saulpaugh


From:
Winston-Salem, NC
Post  Posted 20 Jul 2023 10:34 am    
Reply with quote

Really interesting to hear all these perspectives from experience, thanks for sharing.

Quote:
My trouble with pedal steel is it is hard enough to learn all the intervals between strings of a single tuning...then you add the ability to change the tuning into so many different possible tunings on the fly with your feet! Tricky stuff. -Nic Neufeld


I think about this a good bit nowadays - it often feels like pedal steel is a combination of lap steel & bottleneck slide guitar with just more options when you use the pedals/levers. I’m influenced by traditional pedal steel styles and bottleneck slide, so choosing in the musical moment whether to use pedals or not can sometimes feel like a little mental speed bump! This applies too for single note playing without slides, and choosing whether to move the bar or use a pedal instead.
_________________
https://playpedalsteel.com - An online resource for steel guitar. Download a FREE Pedal Steel Practice Book!
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron