| Author |
Topic: Mesa Boogie Mark 1 Reissue |
Jerry Malvern
From:
Menifee, California, USA
|
Posted 16 Dec 2007 10:49 am |
|
| I have a chance to get one of these amps, it's about 2 years old. Combo with a single 12 speaker. Anybody using it for pedal steel, and what did it cost new and what is it worth today? Amp looks new. |
|
|
 |
Dave Mudgett
From:
Central Pennsylvania and Gallatin, Tennessee
|
Posted 16 Dec 2007 12:31 pm
|
|
I didn't buy it, but I did try one out with my pedal steel, as well as for guitar. Actually, I liked it using the clean settings. Pretty strong and clean, not so far different from a Twin Reverb, but the reverb isn't perhaps as lush. Sounded good with steel and a jazz box, but was too loud for me with a Tele. Of course, I think you should try it out before buying it - this stuff is so subjective.
The list price on this was, I believe, around $1300. I'd probably grab a used one myself if I could get it in the $600-800 range.
Beware - YMMV. |
|
|
|
Mitch Druckman
From:
Arizona, USA
|
Posted 17 Dec 2007 7:13 am
|
|
| Maybe b0b could chime in on this. I saw him play at last year's SW Steel Guitar Convention and he was playing through a Mesa Boogie 112 combo amp. A very distinctive sound and way different than a Peavey. I'm not sure if it was a Mark 1 or a newer model. |
|
|
|
Jerry Malvern
From:
Menifee, California, USA
|
Posted 17 Dec 2007 6:49 pm
|
|
| b0b, you out there? |
|
|
|
Reid Fletcher
From:
Leesville, LA, USA
|
Posted 18 Dec 2007 4:53 pm
|
|
| Jerry--Go to page three in electronics and look under the thread Mesa Boogie 2: Fifty (Reid Fletcher). Bob put a few words about his amp on it. Reid |
|
|
|
Lefty
From:
Grayson, Ga.
|
Posted 18 Dec 2007 5:53 pm
|
|
I own a Mesa Mark I reissue. Mine has a EVM 300 watt speaker in it at the moment. I play through it in my music room sometimes, and it has a distinctive sound. In channel 2 with the master volume at eight or so, and the volume at 2 it has a good clean, warm sound. As previously stated, the reverb is not like a Fender, but more subtle. I have never played mine in a live scenario, so I cannot comment on that.
I guess the drawback would be with an EVM (or other heavy speaker) the weight is about equal to a twin reverb. Not easy on the back. Still, it gets a good old time warm sound, less sterile than my solid state amps. Good luck,
Lefty |
|
|
|
Keith Cordell
From:
San Diego
|
Posted 18 Dec 2007 8:25 pm
|
|
| I'm not a PSG player, but I have a friend that lets me use his with my Fender and it has a lovely tone; I was quite surprised frankly, as I am not a Boogie fan. They tend to sound more full and open and sparkly. I'd use one in a minute if I could afford it. |
|
|
|
Jerry Malvern
From:
Menifee, California, USA
|
Posted 9 Jun 2023 7:10 pm
|
|
| I bought it, fast forward to today. Great amp but its heavy. In really good shape with light duty case. Seems they gave gone up as Mesa aint making them today. Whats the value today? thanks |
|
|
|
Dave Stagner
From:
Minnesota, USA
|
Posted 15 Jun 2023 7:13 pm
|
|
I’m currently using a ‘77 Mark I (not a reissue) with pedal steel, and it works great. Mine has a JBL K120, which makes it even better. I’m using it with an A/B box so I can also plug guitar in, but I’m finding that my guitar settings and PSG settings are fairly different, so guitar gets compromised.
_________________
I don’t believe in pixie dust, but I believe in magic.
1967 ZB D-10
1990 OMI Dobro
Recording King lap steel with Certano benders |
|
|
|
