Author |
Topic: I Need A Fuse Holder Assembly 1977 Peavey LTD Steel Amp |
W. C. Edgar
From: Iowa City Iowa, Madison CT, Nashville, Austin, Phoenix, DFW
|
Posted 7 Aug 2023 10:07 am
|
|
One that will fit in the hole and will not stick out past the back of the amp and get knocked off again
Don't tell me to search it on the internet as someone has to have the correct one out there even if I have to upgrade to the screwdriver slot type
Thanks
WC _________________ First owner of Steelseat.com
1980 Sho-Bud Pro II & 1977 Sho-Bud Pro l
Lawrence 610 Pickups
1979 Peavey LTD
1980 Peavey Nashville 400
Goodrich L-120
Toured with Tim McGraw, Alan Jackson, Ty England & more
wcedgar.com |
|
|
|
Bill A. Moore
From: Silver City, New Mexico, USA
|
|
|
|
W. C. Edgar
From: Iowa City Iowa, Madison CT, Nashville, Austin, Phoenix, DFW
|
Posted 7 Aug 2023 12:36 pm
|
|
LOL Yep I know
It's a 3AG Type and 6 Amp fuse
Problem is, none of the manufacturers show the total legnth
Thanks _________________ First owner of Steelseat.com
1980 Sho-Bud Pro II & 1977 Sho-Bud Pro l
Lawrence 610 Pickups
1979 Peavey LTD
1980 Peavey Nashville 400
Goodrich L-120
Toured with Tim McGraw, Alan Jackson, Ty England & more
wcedgar.com |
|
|
|
Bill A. Moore
From: Silver City, New Mexico, USA
|
Posted 7 Aug 2023 1:24 pm
|
|
Open up the fuses listed, and open measurements and specs, length is there!
(There are also "pictures" with the dimensions!) |
|
|
|
Ken Fox
From: Nashville GA USA
|
|
|
|
W. C. Edgar
From: Iowa City Iowa, Madison CT, Nashville, Austin, Phoenix, DFW
|
Posted 11 Aug 2023 8:03 pm
|
|
The first one listed is too long
Inside of chassis I only have 1 1/2" to work with _________________ First owner of Steelseat.com
1980 Sho-Bud Pro II & 1977 Sho-Bud Pro l
Lawrence 610 Pickups
1979 Peavey LTD
1980 Peavey Nashville 400
Goodrich L-120
Toured with Tim McGraw, Alan Jackson, Ty England & more
wcedgar.com |
|
|
|
Ken Fox
From: Nashville GA USA
|
|
|
|
W. C. Edgar
From: Iowa City Iowa, Madison CT, Nashville, Austin, Phoenix, DFW
|
Posted 20 Aug 2023 6:36 pm
|
|
Thanks, everybody
I got one from Roger at Peavey
If you need one go to them
I upgraded to the screwdriver slot type and it only sticks out about 1/8" on the back and leaves plenty of room inside the chassis to solder the two wires.
peavey does it again. _________________ First owner of Steelseat.com
1980 Sho-Bud Pro II & 1977 Sho-Bud Pro l
Lawrence 610 Pickups
1979 Peavey LTD
1980 Peavey Nashville 400
Goodrich L-120
Toured with Tim McGraw, Alan Jackson, Ty England & more
wcedgar.com |
|
|
|