| Author |
Topic: Envelope Filter |
Lee Rider
From:
Fort Bragg, California, USA
|
Posted 11 May 2023 1:36 pm |
|
Looking for a Q-Tron Micro or something similar. Can trade stuff or cash.
Thanks
Lee Rider
_________________
Bowman SD10 push pull 3x5, Modified Hudson PedalBro, Sarno Tonic preamp, Evans SE200 with Altec 418B, Standel Custom 15, '67 Showman with D-130F in cabinet, Ganz Straight Ahead, custom Wolfe 6 string dobro, '52 Gibson Century 6. |
|
|
 |
Jon Light
From:
Saugerties, NY
|
Posted 12 May 2023 3:50 am
|
|
Just fyi I've got one of these. It's dirt cheap and it's pretty good. (I'm not offering mine -- just showing you this).
Like all envelope filters that I've used, it can be difficult to dial in the sensitivity. It is easily overpowered by a steel pickup and the sweet spot takes some work to find.
https://www.sonicake.com/products/cry-bot-new
 |
|
|
|
Lee Rider
From:
Fort Bragg, California, USA
|
Posted 12 May 2023 8:53 am
|
|
Thanks Jon!
_________________
Bowman SD10 push pull 3x5, Modified Hudson PedalBro, Sarno Tonic preamp, Evans SE200 with Altec 418B, Standel Custom 15, '67 Showman with D-130F in cabinet, Ganz Straight Ahead, custom Wolfe 6 string dobro, '52 Gibson Century 6. |
|
|
|
Bob Watson
From:
Champaign, Illinois, U.S.
|
|
|
|
Lee Rider
From:
Fort Bragg, California, USA
|
Posted 13 May 2023 7:45 am
|
|
Thanks Bob. Lots of choices and nice that some are affordable..
Best,
Lee Rider
_________________
Bowman SD10 push pull 3x5, Modified Hudson PedalBro, Sarno Tonic preamp, Evans SE200 with Altec 418B, Standel Custom 15, '67 Showman with D-130F in cabinet, Ganz Straight Ahead, custom Wolfe 6 string dobro, '52 Gibson Century 6. |
|
|
|
Jon Light
From:
Saugerties, NY
|
Posted 13 May 2023 8:58 am
|
|
I'll wager that those two are identical. I see that on a lot of the Asian imports. Common layouts, changed graphics, most likely the same guts, rebranded.
If I were buying, I'd buy whichever was cheaper on a given day (or whichever model a favorite dealer was carrying).
Of course I could be wrong. In which case my lawyer wants me to say that all wagers I make are null and void on the Steel Guitar Forum. |
|
|
|
Bob Watson
From:
Champaign, Illinois, U.S.
|
Posted 13 May 2023 12:27 pm
|
|
| Jon, I suspect that you are right. Your description of the one you have pretty much describes the one I mentioned. The one I have is basically a one trick pony but it does a good job on the auto wah sound when you get it dialed in. Good luck Lee, I suspect you'll be happy with whatever you wind up buying. |
|
|
|
Steve Lipsey
From:
Portland, Oregon, USA
|
Posted 16 May 2023 4:00 pm
|
|
I went through a bunch of these...ended up with the Analogman version...not the cheapest, but they really mostly don't work so well...they either work only on a small part of the fretboard, or don't trigger well without a really percussive input....the analogman is quite adjustable and flexible...just sayin', sometimes ya' just gotta' bite the bullet...
https://www.buyanalogman.com/Analog_Man_Block_Logo_Envelope_Filter_Pedal_p/am-blockenvelope.htm
_________________
https://www.lostsailorspdx.com
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor |
|
|
|
