Emmons Volume Pedal Pin

Joseph Byrd · From: Cumming, GA, USA

Good morning all! In search for a volume pedal pin for a 1970 emmons push pull. To be precise, the pin that holds an emmons branded volume pedal to the pedal bar. Happy to pay shipping from anywhere. Message me. Thanks

Jack Hanson · From: San Luis Valley, USA

A basic 5/16" x 1" clevis pin that any decent hardware store (a dying breed) should have in stock will suffice. A box of 25 is available for $9.77 from McMaster-Carr.

John Swain · From: Winchester, Va

The typical George L tuning wrench fits well !

Jack Stoner · From: Kansas City, MO

I've seen posts that say a standard 1/4" guitar cable plug works.

Erv Niehaus · From: Litchfield, MN, USA

The right sized bolt.

Forum Index > Wanted To Buy		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: