| Author |
Topic: Dobro pedal |
David Biggers
From:
Texas, USA
|
Posted 1 Mar 2023 3:47 pm |
|
The volume goes way down on my dobro pedal when I engage it, causing me to have to turn up the amp almost full blast.
Any ideas or fixes? |
|
|
 |
Michael Hartz
From:
Decorah, Iowa, USA
|
Posted 1 Mar 2023 5:07 pm
|
|
| What brand is your dobro pedal? |
|
|
|
David Biggers
From:
Texas, USA
|
Posted 1 Mar 2023 5:45 pm
|
|
Bradshaw.
Pedal board In-line
Amp
Drop tune pedal
Reverb pedal
Bradshaw pedal
MSA Guitar |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 2 Mar 2023 3:07 am
|
|
| First suspect is the power supply. |
|
|
|
Jon Light
From:
Saugerties, NY
|
Posted 2 Mar 2023 4:44 am
|
|
| I really don't know if this would make a difference in perceived output level (vs just clean headroom) but you are aware that the Bradshaw pedal runs on 18v, right? Or at least the Resonator II does. |
|
|
|
Roy Carroll
From:
North of a Round Rock
|
Posted 2 Mar 2023 8:12 am
|
|
Do you have it before everything else in the chain. I run mine first after the volume pedal with no issues.
_________________
Just north of the Weird place, south of Georgetown |
|
|
|
Craig A Davidson
From:
Wisconsin Rapids, Wisconsin USA
|
Posted 2 Mar 2023 7:38 pm
|
|
Mine was built to clip on the guitar and I ran it first in line right after the guitar. If you were playing a real dobro the guitar would come before anything else.
_________________
2013 Williams D-10, 2019 Williams D-10, 1970 Fender Twin, Evans SE200, Fender Tonemaster Twin, Hilton pedal, Jagwire Strings. |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 2 Mar 2023 7:54 pm
|
|
| If it is one of the Boss units with a cover over the slides, Check close the volume slide may have got moved somehow. |
|
|
|
David Biggers
From:
Texas, USA
|
Posted 3 Mar 2023 8:43 am
|
|
I’ll try putting it 1st in the chain.
Thx. |
|
|
|
