| Author |
Topic: Sho Bud Pro I Question |
Kevin Fix
From:
Michigan, USA
|
Posted 12 Jan 2023 7:38 pm |
|
| I have a Sho Bud Pro I with the 2 hole pullers with the brass inserts. My changer is a 2 raise, 2 lower changer. What I am trying to do lower my 6th string a full step with my RKL lever. I have the proper bell crank assmb. and rod. With everything properly connected. I can not lower the 6th string a full step without it wanting to raise the upper half of the changer. I have a Sho Bud Super Pro that I lower the 6th string a full step with no issues what so ever. Is the Pro I 2 hole puller not equipped to do that? |
|
|
 |
Skip Edwards
From:
LA,CA
|
Posted 12 Jan 2023 8:30 pm
|
|
| Are you using a wound 6th? If so, try a plain 6th. |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 12 Jan 2023 9:22 pm
|
|
| Use the lower hole furthest from the cabinet top if you're using a plain string. You might to have to change the lever stop in question- if it still doesn't lower and is wanting to raise lessen the tension on the lower return spring. |
|
|
|
Kevin Fix
From:
Michigan, USA
|
Posted 13 Jan 2023 2:33 pm
|
|
| Thank you very much guys!!! Will be my next move. |
|
|
|
Kelcey ONeil
From:
Sevierville, TN
|
Posted 13 Jan 2023 6:01 pm
|
|
Also, put the rod through the changer in the hole farthest from the axle.
_________________
Co-owner and operator: Emmons Guitar Co. |
|
|
|
