| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Volume pot for a 1940 Panda. 500K or 250K?
Reply to topic
Author Topic:  Volume pot for a 1940 Panda. 500K or 250K?
David DeLoach


From:
Tennessee, USA
Post  Posted 31 Dec 2022 4:39 am    
Reply with quote

I just received new plates for my 1940 Panda from Steve Marinak and they are GREAT, but I need to replace this large volume pot with one that is the same size as the tone pot in this photo so that it will work with the new plate.

I can't tell if the one currently in the Panda is a 500k or 250k, but I like how it sounds.

Any recommendations for the new smaller pot?

Thanks!
David




_________________
https://www.MasterGuitarists.com/
View user's profile Send private message Send e-mail Visit poster's website
John Dahms

 

From:
Perkasie, Pennsylvania, USA
Post  Posted 31 Dec 2022 6:58 am    
Reply with quote

The physical size of the pot has more to do with the surface area of the resistive track and how long it will last than the sound. If you are not a "pot fiddler" who constantly is adjusting it it won't matter. I have records that show both 100k and 250k may have been used by Ric at the factory.
I would go with a 250k. Remember you have a tone control to fine tune the sound as well.
_________________
Time flies like an eagle
Fruit flies like a banana.
View user's profile Send private message Send e-mail
David DeLoach


From:
Tennessee, USA
Post  Posted 31 Dec 2022 7:47 am    
Reply with quote

Thanks John!

Are all 250K pots pretty much the same, or is there a particular brand anyone would recommend?
_________________
https://www.MasterGuitarists.com/
View user's profile Send private message Send e-mail Visit poster's website
Michael Brebes

 

From:
Northridge CA
Post  Posted 31 Dec 2022 9:40 am    
Reply with quote

Turn the pot fully clockwise and measure the resistance between the two outside legs of the pot. One of them is the one with the end clipped off. That should give you a proper measurement. I just looked at the photos, which look confusing. Measure the pot fully counterclockwise as well. Whichever is the highest value is the correct one.
_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso

Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100
View user's profile Send private message Send e-mail
Tony Oresteen


From:
Georgia, USA
Post  Posted 3 Jan 2023 2:00 am    
Reply with quote

Pots come in two basic types: audio taper and linear taper.

Usually an A as in 250kA or A250k indicates an audio taper.

A B usually indicates a linear taper as in B250k or 250kB.

Try one each and use the one you like best.
_________________
Tony
Newnan, GA

Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8
View user's profile Send private message Send e-mail
David DeLoach


From:
Tennessee, USA
Post  Posted 3 Jan 2023 4:17 am    
Reply with quote

Thanks for the education on volume pots!

Much appreciated.
_________________
https://www.MasterGuitarists.com/
View user's profile Send private message Send e-mail Visit poster's website
David DeLoach


From:
Tennessee, USA
Post  Posted 11 Jan 2023 6:04 pm    
Reply with quote

I got the volume pot replaced. Had to get two friends to help me as the only thing I can do with solder gun is burn my fingers and make a mess.

These guys are from Cuba and can figure out just about anything. They had to modify the new pot's connections a bit to make it work, but it works and sounds great now.


_________________
https://www.MasterGuitarists.com/
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron