| Author |
Topic: WTB: Need Stringmaster Parts |
Tony Oresteen
From:
Georgia, USA
|
Posted 24 Mar 2022 1:58 pm |
|
UPDATE 12/10/2022:
I really need:
1. Three blend knobs for a Mark II Stringmaster.
EDIT: Found some. See below in thread source.
2. A Mark II T8 control plate with bridge, bridge screws, bridge springs, and knife switch slot & toggle switch hole like this one:
(I could make a D8 control plate with a knife switch slot work or a Mark II T8 plate with three holes for push-buttons)
3. Three Mark II bridge covers.
4. One Mark I bridge cover that screws on.
5. A pair of Mark II black plastic pickup covers.
I am now good on tuner trays and tuners.
Thanks!
_________________
Tony
Newnan, GA
Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8
Last edited by Tony Oresteen on 12 Dec 2022 4:36 pm; edited 4 times in total |
|
|
 |
Tony Oresteen
From:
Georgia, USA
|
Posted 26 Apr 2022 11:39 am
|
|
Also need a '53 bridge, connecting rod nuts, and a '53 bridge cover.
What else do you have?
TTT
_________________
Tony
Newnan, GA
Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8 |
|
|
|
Tony Oresteen
From:
Georgia, USA
|
Posted 29 Nov 2022 7:55 pm
|
|
I am still looking for Stringmaster parts. Do not need any more necks.
What do you have lying around?
_________________
Tony
Newnan, GA
Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8 |
|
|
|
Al Meyers
From:
Downey, California
|
Posted 30 Nov 2022 6:59 pm Re: WTB: Need Stringmaster Parts
|
|
I have a bridge cover.
 |
|
|
|
Tony Oresteen
From:
Georgia, USA
|
Posted 30 Nov 2022 9:53 pm
|
|
PM sent.
_________________
Tony
Newnan, GA
Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8 |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 1 Dec 2022 8:14 am
|
|
That bridge cover won't fit a '53.
That takes a cover that screws down.
Erv |
|
|
|
Al Meyers
From:
Downey, California
|
Posted 1 Dec 2022 4:13 pm
|
|
| It's not for a '53. Everything is under control. |
|
|
|
Tony Oresteen
From:
Georgia, USA
|
Posted 10 Dec 2022 6:08 pm
|
|
TTT
_________________
Tony
Newnan, GA
Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8 |
|
|
|
Al Meyers
From:
Downey, California
|
Posted 10 Dec 2022 10:32 pm Re: WTB: Need Stringmaster Parts
|
|
Hi Tony,
This guy on Ebay has vintage Fender steel parts. He buys old steels, then takes them apart. I'm not a fan of that at all.
He does not take any messages and his feedback is not 100%. He has had some unhappy customers so please proceed with great caution!
https://www.ebay.com/str/guitarpartsandpieces?_trksid=p2047675.m3561.l2563 |
|
|
|
Tony Oresteen
From:
Georgia, USA
|
Posted 11 Dec 2022 5:29 am
|
|
Thanks! I am aware of Mike and he does not have the plate I need.
_________________
Tony
Newnan, GA
Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8 |
|
|
|
K Maul
From:
Hadley, NY/Hobe Sound, FL
|
Posted 11 Dec 2022 5:49 am
|
|
I got a good blend control from StewMac. I used it on my modified Fender pedal steel for a second pickup. Sweetwater also has them.
_________________
KEVIN MAUL: Airline, Beard, Clinesmith, Danelectro, Evans, Fender, GFI, Gibson, Hilton, Ibanez, Justice, K+K, Live Strings, MOYO, National, Oahu, Peterson, Quilter, Rickenbacher, Sho~Bud, Supro, TC, Ultimate, VHT, Williams, X-otic, Yamaha, ZKing. |
|
|
|
Tony Oresteen
From:
Georgia, USA
|
|
|
|
Al Meyers
From:
Downey, California
|
Posted 12 Dec 2022 5:32 pm
|
|
| I was trying to remember this dealer. I bought one of these from him quite a while back. Good job! |
|
|
|
